Hello people. I have a weird problem with a Motorola V3 RAZR, let me explain you.
Here I post a 3GP video file that you can see what it's my problem, this V3 worked almost fine at all, but I flashed cause when I turned OFF it get it OFF very very quickly, I mean, not showed good bye screen, so I proceeded to flashed using this Monsterpack: R374_G_0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E _V3_01_10R_GSMV3xxT677GA164_1FF.shx and when I was flashing out using RSD Lite v4.1 and when almost finish, in procedure RSD said: Phone is being rebooted this phone never started again, so I proceeded to turn it ON manually in flash mode and never never STARTED AGAIN.
I downloaded FULL FLASH in support too and problem persist: v3_R374_G_0E.42.10R_fullflash.rdf....none flashes have problems, all of them are OK. I flashed with Motorocker too and using the option BACKUP-->WRITE FULL FLASH and nothing :-(
Another important data, I always can connect it... S BLANK NEPTUNE interface OK. I used REPAIR botton, finished OK and problem persist too.
HERE I POST A FULL LOG ABOUT REPAIR BOTTON:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Welcome dear user.
Motorocker version used: 2.25 (Motorola V360, R4513)
Package file: NOT SELECTED
Language file: NOT SELECTED
Selected: Motorola V3, firmware: R374
Clicked button: REPAIR (&Repair)
Detected motorola interface: Motorola Flash
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Decision: bootcore flashing needed.
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Uploading ramloader of version: 08.29
Reading 16 bytes...
Reading 59392 bytes...
Reading 128 bytes...
Reading 131072 bytes...
Reading 131072 bytes...
Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Uploading ramloader of version: 08.29
Show WINDOW: Head = "Stage complete.", line1 = "Unplug cable, remove battery, insert battery, insert cable. Press PowerON shortly.", line2 = "If you use REPAIR cable, do not use it this time. Use USUAL cable.", line3 = "Wait for phone to be detected (see below). Then Click OK...", button1 = "", button2 = "&OK"
Showed WINDOW modal result: 2
Full bootcore version: 000C0200FF000200
Phone serial number: F00200000000416F09160F07026004899200
Uploading ramloader of version: 08.23
Show WINDOW: Head = "Repair complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Attempt to restore: Found restore point ok.
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Uploading ramloader of version: 08.29
Done.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Please...see video file, see picture attached.
PS: I almost forgot tell you, I did a CHIP ERASE located in MISC Tab in Motorocker before all this.
PS2: In Video file shows BATTERY LOW...of course battery was FULLY CHARGED when I tried everything.
Thanks in advance...please please....let me know what can I do...I am desperate.
Here I post a 3GP video file that you can see what it's my problem, this V3 worked almost fine at all, but I flashed cause when I turned OFF it get it OFF very very quickly, I mean, not showed good bye screen, so I proceeded to flashed using this Monsterpack: R374_G_0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E _V3_01_10R_GSMV3xxT677GA164_1FF.shx and when I was flashing out using RSD Lite v4.1 and when almost finish, in procedure RSD said: Phone is being rebooted this phone never started again, so I proceeded to turn it ON manually in flash mode and never never STARTED AGAIN.
I downloaded FULL FLASH in support too and problem persist: v3_R374_G_0E.42.10R_fullflash.rdf....none flashes have problems, all of them are OK. I flashed with Motorocker too and using the option BACKUP-->WRITE FULL FLASH and nothing :-(
Another important data, I always can connect it... S BLANK NEPTUNE interface OK. I used REPAIR botton, finished OK and problem persist too.
HERE I POST A FULL LOG ABOUT REPAIR BOTTON:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Welcome dear user.
Motorocker version used: 2.25 (Motorola V360, R4513)
Package file: NOT SELECTED
Language file: NOT SELECTED
Selected: Motorola V3, firmware: R374
Clicked button: REPAIR (&Repair)
Detected motorola interface: Motorola Flash
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Decision: bootcore flashing needed.
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Uploading ramloader of version: 08.29
Reading 16 bytes...
Reading 59392 bytes...
Reading 128 bytes...
Reading 131072 bytes...
Reading 131072 bytes...
Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Uploading ramloader of version: 08.29
Show WINDOW: Head = "Stage complete.", line1 = "Unplug cable, remove battery, insert battery, insert cable. Press PowerON shortly.", line2 = "If you use REPAIR cable, do not use it this time. Use USUAL cable.", line3 = "Wait for phone to be detected (see below). Then Click OK...", button1 = "", button2 = "&OK"
Showed WINDOW modal result: 2
Full bootcore version: 000C0200FF000200
Phone serial number: F00200000000416F09160F07026004899200
Uploading ramloader of version: 08.23
Show WINDOW: Head = "Repair complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Attempt to restore: Found restore point ok.
Full bootcore version: 010C02FFFF000826
Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
Uploading ramloader of version: 08.29
Done.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Please...see video file, see picture attached.
PS: I almost forgot tell you, I did a CHIP ERASE located in MISC Tab in Motorocker before all this.
PS2: In Video file shows BATTERY LOW...of course battery was FULLY CHARGED when I tried everything.
Thanks in advance...please please....let me know what can I do...I am desperate.
Comment