Oppo CPH1931 has two different hardware versions.
With UFS memory and with eMMC memory chip. UFS version is not supported.
Legija
Administrator
Last Activity: Today, 10:10 PM
Joined: 05-10-2014
Location:
-
Adapter needs pull up resistor for CLK.
Put blue switch to ON (dat0 and cmd), add 100 ohm between VCCQ and CLK signals.
Set VCCQ switch...Leave a comment:
-
eMMC/SD read write tab, advanced emmc/sd, read info, save emmc info file.Leave a comment:
-
Post your box serial in account recovery section.Leave a comment:
-
There is no pinout at the moment.Leave a comment:
-
You have problem there. Box measures vccq level and if it says level is 3.6v that means you have some alien power source connected to vccq line.
...Leave a comment:
-
If there is no frp lock you can try to find board software and flash it with IDT.Leave a comment:
-
Replace emmc. You could try maybe to update firmware, but I'm not sure if there is firmware for it, as i cant see PNM.Leave a comment:
-
Click "Resurrection", select "Repair Bootloader".
If there is some error, post log.Leave a comment:
-
Please post full log.Leave a comment:
-
Save file to "Repairpacks" folder.
Note that you need to use latest firmware to flash after bootloader repair:
J410FXXS2ATF1...Leave a comment:
-
For lg mtk models to enter download mode bootchain sequence is this:
-bootrom -> preloader -> uboot (LK) -> LAF
You should...Leave a comment:
No activity results to display
Leave a comment: