Announcement

Collapse
No announcement yet.

V3 RAZR with problem...can't turn ON...3GP video inside....HELP ME!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • V3 RAZR with problem...can't turn ON...3GP video inside....HELP ME!!!

    Hello people. I have a weird problem with a Motorola V3 RAZR, let me explain you.

    Here I post a 3GP video file that you can see what it's my problem, this V3 worked almost fine at all, but I flashed cause when I turned OFF it get it OFF very very quickly, I mean, not showed good bye screen, so I proceeded to flashed using this Monsterpack: R374_G_0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E _V3_01_10R_GSMV3xxT677GA164_1FF.shx and when I was flashing out using RSD Lite v4.1 and when almost finish, in procedure RSD said: Phone is being rebooted this phone never started again, so I proceeded to turn it ON manually in flash mode and never never STARTED AGAIN.

    I downloaded FULL FLASH in support too and problem persist: v3_R374_G_0E.42.10R_fullflash.rdf....none flashes have problems, all of them are OK. I flashed with Motorocker too and using the option BACKUP-->WRITE FULL FLASH and nothing :-(



    Another important data, I always can connect it... S BLANK NEPTUNE interface OK. I used REPAIR botton, finished OK and problem persist too.



    HERE I POST A FULL LOG ABOUT REPAIR BOTTON:

    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

    Welcome dear user.
    Motorocker version used: 2.25 (Motorola V360, R4513)
    Package file: NOT SELECTED
    Language file: NOT SELECTED
    Selected: Motorola V3, firmware: R374
    Clicked button: REPAIR (&Repair)
    Detected motorola interface: Motorola Flash
    Full bootcore version: 010C02FFFF000826
    Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
    Decision: bootcore flashing needed.
    Full bootcore version: 010C02FFFF000826
    Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
    Uploading ramloader of version: 08.29
    Reading 16 bytes...
    Reading 59392 bytes...
    Reading 128 bytes...
    Reading 131072 bytes...
    Reading 131072 bytes...
    Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
    Showed WINDOW modal result: 2
    Full bootcore version: 010C02FFFF000826
    Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
    Uploading ramloader of version: 08.29
    Show WINDOW: Head = "Stage complete.", line1 = "Unplug cable, remove battery, insert battery, insert cable. Press PowerON shortly.", line2 = "If you use REPAIR cable, do not use it this time. Use USUAL cable.", line3 = "Wait for phone to be detected (see below). Then Click OK...", button1 = "", button2 = "&OK"
    Showed WINDOW modal result: 2
    Full bootcore version: 000C0200FF000200
    Phone serial number: F00200000000416F09160F07026004899200
    Uploading ramloader of version: 08.23
    Show WINDOW: Head = "Repair complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
    Showed WINDOW modal result: 2
    Attempt to restore: Found restore point ok.
    Full bootcore version: 010C02FFFF000826
    Full firmware version: R374_G_0E.40.3ER_A:SE8609AXXJ804C
    Uploading ramloader of version: 08.29
    Done.


    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-





    Please...see video file, see picture attached.





    PS: I almost forgot tell you, I did a CHIP ERASE located in MISC Tab in Motorocker before all this.
    PS2: In Video file shows BATTERY LOW...of course battery was FULLY CHARGED when I tried everything.

    Thanks in advance...please please....let me know what can I do...I am desperate.
    ..:: Improving this box to the top ::..

  • #2
    Enter blank mode using "Force Blank Mode" button.
    Then close 2.25, and start 2.15 and press repair. After this, you may need to reflash phone.
    ICQ: 299-912-089
    QQ: 1634811353

    Comment


    • #3
      thanks anyway

      Mr. legija...problem persist...I tried tried step by step and nothing :-)

      Maybe problem of hardware...but it's very weird...like I told you...worked almost FINE everything....... it's very strange and I don't know what can I do anymore....

      Any other idea?

      TIA
      ..:: Improving this box to the top ::..

      Comment


      • #4
        no more ideas? nothing new?

        TIA
        ..:: Improving this box to the top ::..

        Comment

        Working...
        X