First w213 only "phone lock" I use ODM_Unlock_v1.20g I click "unlock" the "repair" but still "phone lock". I use the "ODMRocker_v1.34" I click “Repair EEPROM” and "Unlock NET" Still "phone lock".
Then I try flash use flash file AP00321.0046.K2.LP_W213_0046_A01.FLEX_W213_AC_003. ubf
66% position the computer "freeze" now w213 dead conditions. I repeat
to flashing still "freeze" sometimes different in volume percent. Then I try in another computer the result flash process here is always successful, but still dead w213. And a column for the "model type, Fw, lp, flex is empty ..."
Flash file is downloaded from the support area which I already use:
- AP00321.0046.K2.LP_W213_0046_A01.FLEX_W213_AC_003. ubf
-AP00323.0046.K2.LP_W213_0046_A01.FLEX_W213_AB_003. ubf
- HG01123.0045.K2.LP_W213_0045_018.FLEX_W213_A3_008. ubf
-W213_PRC_Nolock_T679TM_0050_K2_LP_W213_0050_A08_FL EX_
W213_A6_00E.ubf
- FLEX_W213_A9_003 [1]. Mot.ubf
- SW_W206_0.0.44.K2.ubf
- LP_W206_0044_A06.ubf
- FLEX_W206_11_003.mot.ubf
Flash method I use is all through "Part mode also to Update mode" I very tired for this case.
W213 conditions are now dead and the fields for the "model type, fw, lp, flex and remain empty ..."
As the picture below ..
How can I fix this problem?
Is Using 'ODMRocker_v1.34 "there is a bug when used in the JCOP CARD?
Please Help me Mr. legija or Hamas….
Then I try flash use flash file AP00321.0046.K2.LP_W213_0046_A01.FLEX_W213_AC_003. ubf
66% position the computer "freeze" now w213 dead conditions. I repeat
to flashing still "freeze" sometimes different in volume percent. Then I try in another computer the result flash process here is always successful, but still dead w213. And a column for the "model type, Fw, lp, flex is empty ..."
Flash file is downloaded from the support area which I already use:
- AP00321.0046.K2.LP_W213_0046_A01.FLEX_W213_AC_003. ubf
-AP00323.0046.K2.LP_W213_0046_A01.FLEX_W213_AB_003. ubf
- HG01123.0045.K2.LP_W213_0045_018.FLEX_W213_A3_008. ubf
-W213_PRC_Nolock_T679TM_0050_K2_LP_W213_0050_A08_FL EX_
W213_A6_00E.ubf
- FLEX_W213_A9_003 [1]. Mot.ubf
- SW_W206_0.0.44.K2.ubf
- LP_W206_0044_A06.ubf
- FLEX_W206_11_003.mot.ubf
Flash method I use is all through "Part mode also to Update mode" I very tired for this case.
W213 conditions are now dead and the fields for the "model type, fw, lp, flex and remain empty ..."
As the picture below ..
How can I fix this problem?
Is Using 'ODMRocker_v1.34 "there is a bug when used in the JCOP CARD?
Please Help me Mr. legija or Hamas….
Comment