Mr. Legija, Please Add This File In Support For All Riff Box Users...

[ZArchi]

2
Legija Hi
Will there be a high write speed on USB-3 with software 1.43?
Or is this a common solution with drivers?

[ayun84]

thank you

[ZArchi]

thank you

WTF...stuped

[Legija]

good morning Legija, I upgraded riff jtag software manager 1.66, while sometimes was now I end up with a box with all the red lights are on and the green light blinks, and asks me drivers for RIFF BOX2 by Rocker Team (c) .2015 I'm home do to bring him back, I removed the seals and I opened it to make the bridge with tweezers to go to bootloader by following the method 1 but to no avail, I ask advice in the forum thanks Frank.

Please go to RIFF Box – eMMC/JTAG support | Rocker Team Flashing Interface - > Downloads. You can download archive which contains all drivers and new JTAG Manager.

[Legija]

2
Legija Hi
Will there be a high write speed on USB-3 with software 1.43?
Or is this a common solution with drivers?

Write speed is limited only by eMMC controller with new drivers.
Of course, write speed will be lower than read speed, which is normal.

[ayun84]

need drivers for win 7 x32

[VIPER_GE]

how about my and black mikron problem, look post #6

[mocputer]

Thanks Legija for fast response you gave me, but keeps asking the drive for RIFF BOX2 by Rocker Team (c). 2015 and I don't see those downloaded from the website of riffbox keeps saying that there are, I have to use a win 7 64 bit? Why am I installed 32 bit, I also tried with the laptop that I was using before but now no longer works, before I was with win xp. Thanks Frank

grazie Legija per la risposta veloce che mi hai dato, ma continua a chiedermi i drive per RIFF BOX2 by Rocker Team (c) .2015 e non mi vede quelli scaricati dal sito della riffbox continua a dire che non ci sono, devo usare un win 7 64 bit per caso ? perchč io lo ho installato a 32bit, ho provato anche col portatile che usavo prima ma adesso non funziona pił, prima andavo con win xp. grazie franco

[ayun84]

is it normal if wait the process of restart box take 4 hours and more

Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: RECOVERY (RIFFBOX2)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...

no driver for riff box at device manager

[ayun84]

Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: RECOVERY (RIFFBOX2)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...

till now (4 hours wait), the process of restarting box in process...don know how long to wait it...

[pigor]

Thank

[Legija]

Thanks Legija for fast response you gave me, but keeps asking the drive for RIFF BOX2 by Rocker Team (c). 2015 and I don't see those downloaded from the website of riffbox keeps saying that there are, I have to use a win 7 64 bit? Why am I installed 32 bit, I also tried with the laptop that I was using before but now no longer works, before I was with win xp. Thanks Frank

grazie Legija per la risposta veloce che mi hai dato, ma continua a chiedermi i drive per RIFF BOX2 by Rocker Team (c) .2015 e non mi vede quelli scaricati dal sito della riffbox continua a dire che non ci sono, devo usare un win 7 64 bit per caso ? perchč io lo ho installato a 32bit, ho provato anche col portatile che usavo prima ma adesso non funziona pił, prima andavo con win xp. grazie franco

When You download archive from RIFF Box – eMMC/JTAG support | Rocker Team Flashing Interface - extract it, driver is in "New Driver" folder.

@ayun84
Have You disconnected TP before clicking "Firmware Update" ?
After firmware v1.43 is updated, box will restart with new VID&PID and You should install driver at that point. It's safe to close JTAG Manager.

[spike_belmont]

Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: RECOVERY (RIFFBOX2)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...

till now (4 hours wait), the process of restarting box in process...don know how long to wait it...

Same here but "only" 10 minutes now. I hope it doesn't take hours to update, that is strange.

[Legija]

Same here but "only" 10 minutes now. I hope it doesn't take hours to update, that is strange.

You can wait even few years, it wont help unless You install driver now.

[VIPER_GE]

Legija what about my problem? from post #6