Now try with hotspot shield VPN.
Announcement
Collapse
No announcement yet.
Mr. Legija, Please Add This File In Support For All Riff Box Users...
Collapse
X
-
RIFF JTAG Manager v1.66, RIFF II Firmware v1.42 (10x faster)
Hello,
Please read this carefully if You are RIFF Box v2 user:
RIFF JTAG Manager 1.66
---------------------------
- RIFFBOX2 support for new connection mode is added (for new Drivers)
- Due to new drivers Read/Write speeds via eMMC interface increased 10 times and more
- Read/Write speed is now shown in MB/s
- Firmware Update process adjusted for slow networks (Indonesia, Bangladesh, India . . .)
RIFF Box Firmware v1.42
---------------------------
- RIFFBOX connection mode is optimized for better speed, it is no more the CDC.
The data transfer speeds are increased more than 10 times.
- Fixed bug in handling the erroneous situations during eMMC data read operations.
WARNING ! ! !
DO NOT install new firmware if You don't have USB 3.0 port !
RIFF Box v2 users:
1. Download new files from server (JTAG Manager and "New Drivers")
2. Click "Firmware Update" and wait for process to be finished,
(Update port driver remains old ! ! !)
3. Install new drivers from "New Driver" folder in JTAG Manager install dir.
New driver, together with new firmware will dramatically increase performances with eMMC chips and SD cards.
Theoretical speed is up to 18MB/s using 4bit bus width.
In practice it can depend on eMMC chip model but even for oldest chips it's near 10MB/s.
RIFF Box v1 users don't need to install new driver, as it cannot be implemented for old hardware for now.
Attached is driver installer which will install correct driver version:Last edited by Legija; 04-07-2017, 01:01 AM.
Comment
-
RIFF JTAG Manager v1.67, RIFF Box Firmware v1.43
JTAG Manager 1.67
---------------------------
- Fixed bug (which is related to RIFFBOX2 only), which caused box connection error, after this operation: "Setting new JTAG/eMMC License to the RIFFBOX."
RIFF Box Firmware v1.43
---------------------------
- Fixed bug related to RIFF Box v1 eMMC detection
- Fixed bug related to RIFF Box v2 USB 2.0 ports enumeration
New RIFF Box v2 drivers:
----------------------------
- Drivers from year 2014 (x86 and x64)
Instructions for users with V2 box and "Device cannot start, error code 10" problem:
Method 1:
- Disconnect RIFF Box v2 from USB port
- Open box housing and take PCB out
- Connect TP1 to TP2 using tweezers,
- Connect USB cable to Box and PC
- Disconnect TP-s
- Launch JTAG Manager (any version from 1.65 and up)
- Perform Firmware Update as requested
After You connect TP-s and USB cable, box will enumerate in bootloader mode. RIFF Update Port driver is required (like allways during firmware update) and Recovery firmware will be flashed.
After this, normal Firmware Update procedure will follow and You can use RIFF Box on any USB port (2.0 or 3.0).
Method 2:
- Find working USB 3.0 port (By working means that LPCDevice driver works)
- Update box to V1.43 firmwareAttached Files
Comment
-
Big thanks legija my riff box problem solved by tp update
Last edited by shahinbangla; 04-10-2017, 10:51 AM.
Comment
-
Huawei G520-0000 Repair Packs tested, work!!!
Dead SanDisk emmc replaced the Toshiba EMMC.
Открытие порта...OK
Подключение к RIFF Боксу...OK
Версия Прошивки: 1.42 (RIFFBOX1), Версия JTAG Manager: 1.66
Selected Package: [Huawei G520-0000 V1.01 by <legija>]
Подключение к мертвому телу...OK
Обнаружено устройство с ID: 0x008E00E1
Выставленное I/O Напряжение 2.61В, Частота TCK: RTCK
Частота семплирования RTCK сигнала: [Sample at MAX]
Процедура восстановления начата.
Установка соединения с устройством...OK
Инициализация внутренней конфигурации устройства...OK
Загрузка ресурректора в оперативную память...OK
Установка коммуницации с ресурректором...OK
Обнаружена и проинициализирована FLASH1 микросхема, ID: 0x0011/0x0100 (004GE0, 0x0000EC000000 Bytes = 3.69 GB)
Обнаружена и проинициализирована FLASH2 микросхема, ID: 0x0011/0x0100 (004GE0, 0x000000200000 Bytes = 2.00 MB)
Флеширование мертвого тела...ОК
Package execution complete!
Legija aka please add Jtag pinout Huawei G520-0000 Repair Packs
Attached FilesLast edited by Black-micron; 04-10-2017, 04:17 PM.
Comment
-
good morning Legija, I upgraded riff jtag software manager 1.66, while sometimes was now I end up with a box with all the red lights are on and the green light blinks, and asks me drivers for RIFF BOX2 by Rocker Team (c) .2015 I'm home do to bring him back, I removed the seals and I opened it to make the bridge with tweezers to go to bootloader by following the method 1 but to no avail, I ask advice in the forum thanks Frank.
buon giorno Legija, ho fatto l' upgrade tramite il software riff jtag manager 1.66, mentre prima qualche volta andava ora mi ritrovo con un box con tutte le luci rosse accese e la verde lampeggia, e mi chiede i driver per RIFF BOX2 by Rocker Team (c),2015 non so pił casa fare per riportarlo in vita, ho tolto i sigilli ed lo ho aperto per fare il ponte con le pinzette per andare in bootloader seguendo il metodo 1 ma niente da fare, chiedo consiglio nel forum grazie franco.
Comment
Comment