Thank U so much
Announcement
Collapse
No announcement yet.
Mr. Legija, Please Add This File In Support For All Riff Box Users...
Collapse
X
-
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.65
Connecting to the Updates Server...OK
Server Response: RIFFBOX is Registered.
Getting License from the RIFF Server...ERROR
ERROR: Account is Expired. 30 credits required. Contact Reseller.
i used my box before end gift by now i can't used jtag
Comment
-
RIFF Box Updates, 20.02.2017
Hello,
We just uploaded following DLL-s to support storage:
To download and install these files, simply click "Check for updates" button in JTAG Manager, and select new files for download.
Comment
-
Today's updates:
To download these files click "Check for Updates" button in "Box Service" TAB.
Comment
-
Here is more repair packs contributed by RIFF Box user Black-Micron:
- Samsung T359 compatible pinout is from Samsung T479
- ZTE UZTE V970, pinout included
Last edited by Legija; 02-21-2017, 01:05 AM.
Comment
-
Another repair pack contributed by RIFF Box user Black-Micron:
- Huawei UM840
Pinout from U8500, data compatible for 2kb page NAND chips.Attached Files
Comment
-
JTAG Manager debug version for those with FW update problem
Hello,
Some of the users have problem with firmware update:
Open serial port...OK
Connecting to the RIFF Box...OK
Getting RIFF Box Info...OK
RIFF Box Firmware Version: 1.37 (RIFFBOX1)
Connecting to the Updates Server...OK
Downloading new Firmware from Server...ERROR
ERROR: Couldn't connect to the Updates Server. Try again later.
For this purpose, we've prepared debug version of JTAG Manager, which will write log file with debug info.
Please start this exe from empty folder, and after You try firmware update (successful or not) copy content of "JTAGManager_fw_update_debug.txt" here.Attached Files
Comment
-
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.65
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz
Detected eMMC Chip, ID: 0x15/0x00 (MAG4FB), User Area Partition = 0x0003AB400000 Bytes (14.68 GB)
Reading "User Area Partition" address space from 0x000000000000 to 0x000000100000
Failed to receive answer to READ command.
an solution
Comment
Comment