Tweet
Hello,
At first, i wish to thank You for purchasing our product. You're welcomed to ask for any kind of help in our section !
Since You're beginner, here is the most important set of information related to setup and functions of RIFF Box.
- Download Installation of RIFF Box driver
Depending on Your operating system, download appropriate driver and unpack it to Your hard disk.
Connect the RIFF Box to USB port on Your PC using USB cable. Make sure to use root USB ports, (usually back side of PC) and not the HUB ports.
Windows will detect the new hardware, and request the software driver. YOu can now select driver directory where You've unpacked it.
You may need to DISABLE driver signing option in system settings.
- Download and installation of RIFF JTAG Manager software
Download setup file and execute it. The JTAG Manager will be installed to \System Drive\Program Files\RIFF Box JTAG Manager directory. Example :
"C:\Program Files\RIFF Box JTAG Manager\"
Quick launch and Program group icons will be installed too.
Now You can start the RIFF JTAG Manager application and download all the files which are required to use RIFF Box.
-----
IMPORTANT ! ! !
Windows VISTA and Windows 7 users may need to start software using administrator rights !
-----
Switch the JTAG Manager software to "Box Service" TAB :
Now You can click "Check for updates" button. JTAG Manager will now try to access RIFF Box update server.
----
IMPORTANT ! ! !
If You have firewall set, You need to allow access !
----
JTAG Manager will access the update server and download list of available updates:
As You can see, all available files are check by default, and queued for download. In case You don't need all the files at once, You can use right click to un select all files, and manually chose ones You need urgently. Since there is around 800MB of files currently, and this size will increase with time, You can download only files which You really need at the moment.
In that case, make sure to include latest RIFF Box firmware, and latest JTAG Manager software, together with desired device DLL! ! !
You can now click "Download Selected" and wait til process is finished :
RIFF JTAG Manager will be restarted, and in case You've downloaded new firmware, firmware update will be requested:
Now press "Yes" and wait for process to be finished.
----
IMPORTANT ! ! !
In some cases You may need to install RIFF Box driver again, since update mode enumerates box with different VID&PID. In this case, update process will be stuck at "Restarting". Simply press "Stop" and reconnect box. After setting up the driver, You can press "Firmware update" button again.
----
Now You are ready to use RIFF Box and its software with phones or other supported devices.
Congratulations !
At first, i wish to thank You for purchasing our product. You're welcomed to ask for any kind of help in our section !
Since You're beginner, here is the most important set of information related to setup and functions of RIFF Box.
- Download Installation of RIFF Box driver
Depending on Your operating system, download appropriate driver and unpack it to Your hard disk.
Connect the RIFF Box to USB port on Your PC using USB cable. Make sure to use root USB ports, (usually back side of PC) and not the HUB ports.
Windows will detect the new hardware, and request the software driver. YOu can now select driver directory where You've unpacked it.
You may need to DISABLE driver signing option in system settings.
- Download and installation of RIFF JTAG Manager software
Download setup file and execute it. The JTAG Manager will be installed to \System Drive\Program Files\RIFF Box JTAG Manager directory. Example :
"C:\Program Files\RIFF Box JTAG Manager\"
Quick launch and Program group icons will be installed too.
Now You can start the RIFF JTAG Manager application and download all the files which are required to use RIFF Box.
-----
IMPORTANT ! ! !
Windows VISTA and Windows 7 users may need to start software using administrator rights !
-----
Switch the JTAG Manager software to "Box Service" TAB :
Now You can click "Check for updates" button. JTAG Manager will now try to access RIFF Box update server.
----
IMPORTANT ! ! !
If You have firewall set, You need to allow access !
----
JTAG Manager will access the update server and download list of available updates:
As You can see, all available files are check by default, and queued for download. In case You don't need all the files at once, You can use right click to un select all files, and manually chose ones You need urgently. Since there is around 800MB of files currently, and this size will increase with time, You can download only files which You really need at the moment.
In that case, make sure to include latest RIFF Box firmware, and latest JTAG Manager software, together with desired device DLL! ! !
You can now click "Download Selected" and wait til process is finished :
RIFF JTAG Manager will be restarted, and in case You've downloaded new firmware, firmware update will be requested:
Now press "Yes" and wait for process to be finished.
----
IMPORTANT ! ! !
In some cases You may need to install RIFF Box driver again, since update mode enumerates box with different VID&PID. In this case, update process will be stuck at "Restarting". Simply press "Stop" and reconnect box. After setting up the driver, You can press "Firmware update" button again.
----
Now You are ready to use RIFF Box and its software with phones or other supported devices.
Congratulations !
Comment