Announcement

**bahman abesteh** · 11-16-2014, 03:33 PM

I am waiting for Comments

Thank

**bahman abesteh** · 11-17-2014, 01:24 PM

hi............

HTC Desire 300 problem boot

**bahman abesteh** · 11-19-2014, 06:14 AM

**mobile_man** · 11-23-2014, 09:52 AM

Originally posted by bahman abesteh View Post

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Desire 300 (0P6A10000) V1.0.5392.17802]

Connecting to the dead body...OK
Detected dead body ID: 0x1077C0E1 - WRONG!!!
ERROR: Current ID does not belong to the HTC Desire 300 (0P6A10000) family.

I am waiting for Comments

Thank

Bro as it shows that u might have selected the worng model...or the the file u have slected is wrong...

BR

***Legija*** · 11-24-2014, 09:40 AM

Box Service -> Advanced Settings -> Disable Target IDCODE check.

**bahman abesteh** · 11-25-2014, 08:28 AM

Thank
Mr
Now I have this problem
I appreciate your help

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Desire 300 (0P6A10000) V1.0.5392.17802]

Connecting to the dead body...OK
Detected dead body ID: 0x1077C0E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (D1G4H, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (D1G4H, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000004FC0000

**bahman abesteh** · 12-03-2014, 01:17 PM

I appreciate your help

**sahap** · 12-16-2014, 02:46 PM

no batery only usb cable conected, try agaın resourch problem solved bro.

**bighiner** · 01-14-2015, 07:21 AM

desire 300 have a real problem, this resurector is not work pls riff team solv. i also read and i have this proble
1. if i resurect family is not ok
2. if i use this
Box Service -> Advanced Settings -> Disable Target IDCODE check
i receive this :

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Desire 300 (0P6A10000) V1.0.5392.17802]

Connecting to the dead body...OK
Detected dead body ID: 0x1077C0E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 80 kHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (D1G4H, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (D1G4H, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000004FC0000

Process stop every time at 67%.
i use all rtck speed.

I try to erase full flash, this proces done, and now set doesnt power on.

PLS HELP.

**vasilbojilov** · 03-18-2015, 12:31 PM

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (D1G4H, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (D1G4H, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000008010200