RIFF JTAG – Samsung GT-i8552 Galaxy Win Duos / Galaxy Grand Quattro Unbrick – Total Repair supported

[Legija]

10.08.2013 *RIFF JTAG – Samsung GT-i8552 Galaxy Win Duos / Galaxy Grand Quattro Unbrick – Total Repair supported Repairing bricked Samsung I8552 is easy with the RIFF Box. Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no […]

More...

[Mobile Care]

Mr.legija i8552 came to me hang on logo condition. flashed it by odin every thing went well after pass the mobile restart and did not on again i try to resurrection but i get this message pls reply my sonork id is 100.1660095

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I8552 V1.0.4969.38432]

Connecting to the dead body...OK
Detected dead body ID: 0x008E00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 3,64GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

[littmanr]

i8552 is not same i8550 I tested and ODIN FLASHER fail.