please repair gpp1 size "GB"
Announcement
Collapse
No announcement yet.
Mr. Legija, Please Add This File In Support For All Riff Box Users...
Collapse
X
-
Marvell CPU Support(Samsung sm-J110F CPU)
Good morning Sir
Can you please Add Support for (1.2Ghz Quad-Core Marvell ARMADA PXA1908) drivers Via Jtag Connection So that we can repair J110f Via emmc ISP and JTAG connection.
i get this message
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.49 (RIFFBOX1), JTAG Manager Version: 1.75
Selected Custom Target: [PXA312, 1.80V, TAP0]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x019083D3, IR Length = 0x09 bits
Total IR length: 0x0009 bits
Thanks In advance
Comment
-
RIFF JTAG Manager v1.76 Configure GP Partitions , EXT_CSD support in PKG Editor !
Hello,
Please download newly released files from update server:
RIFF JTAG Manager 1.76
---------------------------
- Fixed bug which caused distorting ExtCSD register data when browsing through ExtCSD Register Fields in case selected field size was more than 4 bytes ([eMMC/SD Advanced] dialog)
- Fixed displaying of General Partition Size in eMMC Connect log (when press [eMMC/SD Advanced]/[Read Info From eMMC] or [Check eMMC/SD Card] buttons)
- Added General Partitions resize dialog ([Configure GP Partitions] button in the eMMC/SD Advanced dialog).
- Action [Access eMMC EXT_CSD Register] inf PKG Editor is improved: added option to select multiple EXT_CSD register fields from eMMC Info File (along with their values)
- Action [Establish SD/MMC Direct Connection] is updated with recommended parameters of SD/MMC Interface, VCCIO Voltage, SD_CLK Frequency and BusWidth.
Note: those parameters have 'recommended' status - they are just copied to proper JTAG Manager fields when the PKG is selected.
New ISP DLL-s:- Nokia Lumia 630,
- Samsung E330K
- Samsung E370K
- Samsung G532F
- Samsung I535
- Samsung I8160
- Samsung I9500
- Samsung J120H
- Samsung J200H
- Samsung J500H
Licensing server updates:
- License switch between JTAG/eMMC interfaces is now off. For all permanently activated accounts, both licenses will be activated at once so box can be used offline in full after licenses are downloaded.
- License switch remains active for trial accounts.
Comment
-
i really need directions to instructions manual using riff jtagg. ive been off the scene too long. i just got my riff Ii box and trying to repair dead boot i9500 (samsung S4). There seems to not be any support by resurrector or even pictures of connection. Any help would be gravely appreciated
regards
ndagi
Comment
-
Originally posted by ndagi View Posti really need directions to instructions manual using riff jtagg. ive been off the scene too long. i just got my riff Ii box and trying to repair dead boot i9500 (samsung S4). There seems to not be any support by resurrector or even pictures of connection. Any help would be gravely appreciated
regards
ndagi
RIFF JTAG Manager -> Box Service -> Check for Updates.
After downloading selected files, it may take a while for JM to rehash all the files, and it may restart few times during that process.
Once that is done, You'll be prompted to download license which is easily done in few seconds.
Now, simply press "Search for DLL" , enter i9500 and click "Ok".
Resurrection TAB is pretty much intuitive, with pinouts buttons on left and resurrection button on right . . .
Comment
Comment