Mr. Legija, Please Add This File In Support For All Riff Box Users...

[mahendracell]

Disconnect ribbon cable from RIFF Box or MOORC JIGs... and press any function button. In case that box internal I/O voltage generator is malfucntioning, You'll receive same error

already tried it?
---------

I understand the following:

nothing connected to riff---> BUT
ERROR: Set I/O Voltage to .-- failed. Real reading is --
= Problem of Riff box

nothing connected to riff---> AND
ERROR: The RTCK Signal does not respond.
=Your box is OK, problem on Adapters, Jigs, phone (try others adapters and targets -objectives phones-)

the problem without phone sir....

[nicolayer]

Please Grand Riff Box Team I have your old riff and new one riff 2 please dear team coders kindly add Read (Dump) eMMC Firmware To Riff box because for new samsung emmc that they dont on the net or forum

Best Regard

What you mean, pls clear.
eMMC FW can be read since support eMMC added.

[equimaxcel]

Hi, how format EMMC Sandisk? the button erase memory no working in Jtag Manager 1.62

[aidin01]

What you mean, pls clear.
eMMC FW can be read since support eMMC added.

iknow but for new emmc it dosent available like Samsung KMR310001M-B611
BGA221

[ZArchi]

Hi, will be corrected in this release overestimated the speed at reading eMMС?

[meiser65]

Asus padfone2 A68 Resurrector error!!!

Had updated to newest soft/firmware.
Now trying to resurrect Asus padfone2 A68 32GB, but there is no Resurrector for this version. Have only for 64Gb ver.

Here id log from my Riff:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.61
Selected Resurrector: [ASUS Padfone A68 V1.0.5019.4304]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HBG4E, 0x000748000000 Bytes = 29.13 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HBG4E, 0x000000200000 Bytes = 2.00 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 29,13GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 58,25GB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000

Where to get correct Resurrector or how to modify present one?

[Legija]

RIFF JTAG Manager v1.63 released

RIFF JTAG Manager v1.63 released

Posted on November 17, 2016
JTAG Manager 1.63

• RIFF2’s eMMC Voltages list bug is fixed.
• BOX detection is re-worked. No special drivers are required anymore, standard COM Port Windows drivers can be used.
• No need to enter COM Port numbers manually for Windows 10. Box is detected automatically as for older Windows versions.
• Added “Missing Resource” feature. If DLL is missing some resource, for example schematics picture, logs or binary data,
  the JTAG Manager will popup special dialog so it is possible for custmers to upload data to RIFF Server after which the DLL can be updated with missing data.
  Active customers will be rewarded with credits.
  .
  
• A feature added to edit registration details (eMail, login, password) in Account Manage dialog: the new button – “Edit Account Details”
  .
  
• Cosmetic interface changes

To download and install this update, simply click “Check for Updates” on “Box Service” TAB.

[alexjuve42]

so riff box 1 is dead????
i need use it for jtag but need connect server and i get server error
how to make old box work???

[Legija]

so riff box 1 is dead????
i need use it for jtag but need connect server and i get server error
how to make old box work???

You need to activate support access (buy 30 credits).

[rickiy zhiyan]

Open serial port...OK
Connecting to the RIFF Box...OK

help sir

Getting RIFF Box Info...OK
RIFF Box Firmware Version: 1.41 (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...ERROR
ERROR: Couldn't connect to the Updates Server. Try again later.

[ibhandari]

You need to activate support access (buy 30 credits).

30 credits this activation 1 year support?

[ba75]

Bug in software

RIFF Box Firmware Version: 1.41 (RIFFBOX2) - Write EXDCSD Register does not work on all eMMC.

[simpleprince49]

sir i have bought second hand box it is registered but i dont know the email and password..can i still use it if i buy activation like emmc...all i have is the box serial number..



thank you for your reply

[simpleprince49]

no answer?i cant open support tickets admin..pls

[Legija]

no answer?i cant open support tickets admin..pls

Unlock Forum - RIFF Box support forum

To read Box S/N, please use Admin Client software.

To post in support sections, please join "RIFF Box users" group.