Mr. Legija, Please Add This File In Support For All Riff Box Users...

[kushariyono19]

do you think that can repair the boot of a galaxy s4 mini i9190 ?eror0x42

[serg_nut]

Good day. Why can't I download RIFF JTAG Manager v. 1.58?.

[Ripgsm]

please help me sir, after upgrade firmware to 1.38 canot jtag proses

log riff

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38, JTAG Manager Version: 1.58
Selected Resurrector: [SE E15i V1.0.4463.41118]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: No response from the RIFF Box.

Loock:

Initializing internal hardware configuration...FAILED

For Last version 1.58 NO BETA, (Beta not working anymore), you must need of use NEW Plugin.

Obsolete version 1.56 work with Old Plugin and No any New future like "EMMC DIRECT"

New Version 1.58 work with New Plugin only and New Server with all new Future like "EMMC DIRECT" itc..

1.58 Need 30 credits for to have New Future, (EMMC DIRECT), for RIFF old more of 6 mounths.

[Ripgsm]

Good day. Why can't I download RIFF JTAG Manager v. 1.58?.

One Time for ALL, Read Here for New Update 1.58, (EMMC)

RIFF JTAG Manager v1.58 RIFF Box Firmware v1.38 released (eMMC Support) | RIFF Box – eMMC/JTAG support

NEED 30 CREDITS for this New Release, just enter Serial and Pay in same above link, since Not to see here in all RIFF page

[clubphone]

where i can find useplugin new version?

[serg_nut]

Ripgsm, Thanks for the reply. I have read the information. But I still have a couple of questions:
1: From here I can't download the installation file.
2: A box purchased only a month ago (about it I wrote above). Still have to pay 30 credits?
Thanks for the reply.

[Ripgsm]

Ripgsm, Thanks for the reply. I have read the information. But I still have a couple of questions:
1: From here I can't download the installation file.
2: A box purchased only a month ago (about it I wrote above). Still have to pay 30 credits?
Thanks for the reply.

1) You are in "RIFF JOIN GROUP"? NO so can't download since not have permission.

2) As i know from Official Thread of @Legjia, for use New 1.58 all RIIF box purchased in last 6 mounths no need of pay this activaction, (EMMC).

Send request to @Legjia with you serial of RIFF

[Ripgsm]

where i can find useplugin new version?

You have Payed and have installed already 1.58? NO, otherwise wasn't doing this Lol question.

[Ripgsm]

last time for all lazy user not reading firts page:

From Official Thread Start of @Lejia

Hello,

Here is JTAG Manager v1.58 with ISP/Direct eMMC support.
To use it, please prepare Your RIFF Box installation folder:

- Rename JTAG Manager v1.56 so You can continue using it if Your account is expired
- Backup "Useful plugins" folder content because old plugins are incompatible with new Exe, and old exe is incompatible with new plugins.
- Start v1.58 exe and download license (If Your account is not expired)
- Update Box firmware to v1.38
- Download new plugins

Old server will be online for some weeks, so users who don't need or cannot acquire new license can get license if they need it.

There will be more info in short time.

JTAG Manager 1.58
---------------------------
- added direct eMMC Access Interface on the RIFFBOX RJ-45 port (check pinout picture for CMD, CLK, DAT0, etc pins positions).
- added eMMC/SD Access page for Read/Write operations on eMMC/SD card via direct interface
- added eMMC/SD Advanced dialog which allows to perform advanced operations with eMMC/SD cards
(reading info, browsing through OCR, CID, CSD (and EXT_CSD for eMMC only) registers' fields, edit separate fields and writting back to card, reading/writting eMMC card's MCU's internal firmware, etc)
- added convenient information presentation for specific eMMC chips: pinouts for testpoints, manuals how to use testpoints to resurrect dead eMMC, etc). These INFO files (*.riffinfo) are stored in JTAG Manager's Documents folder and can be downloaded via generic <Check for Updates> operation.
- added eMMC Firmware Update option
- added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- added elapsed time info for eMMC firmware update stages
- added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Manager's 'Documents' folder.
- added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42's consequences)
- added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
- fixed bug displaying wrong SD card size for cards capacity less than 2GB
- few small improvements and bug fixes

Firmware 1.38
- added direct eMMC Access Interface functionality
- improved one thing in the emmc communication
- added the CMD42 Lock/Unlock/Pasword reset features
- added Forced erase of locked User Area Partition
- added Samsung eMMC Factory Formwat
- fixed bug for SD card support
- eMMC firmware update feature added

Who already not understand or want all in his handle or Use Search button or move a little how have done all other RIFF Users.


Use Only Thanks Button please

[bilalajaj]

thanckssssssssssss

[bilalajaj]

i need this file riff is the best box ever

[kaarem]

ok thanks man

[kaarem]

thanckssssssssssss

[Darioru]

I paid for this method. Please update my credit

[oem]

Hello,

i pay for EMMC support when can i use it?

best regards