Announcement

Collapse
No announcement yet.

EMMC firmware update HOW to ?

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    EMMC firmware update HOW to ?

    KMVYL000LM-B503 error code 00FF8080 with atf!
    log in riff ,connected tp to gnd

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

    Connecting to the SD/eMMC Card...OK
    Set I/O Voltage reads as 1.79V, SD_CLK Frequency is 40 KHz

    Memory Type .......................... eMMC
    Manufacturer ID ...................... 0x15
    OEM/Application ID ................... 0x00
    Product Name ......................... "000000"
    Package .............................. BGA
    User Area Partition Size ............. 0x000200000000 Bytes (8.00 GB)
    Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
    RPMB Partition Size .................. 0x000000100000 Bytes (1.00 MB)
    OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
    Write Protection Bits ................ NONE
    Boot Configuration ................... No Boot
    Chip Revision ........................ 0.0
    Multimedia Card Revision ............. 1.5 (eMMC v4.41)
    Serial Number ........................ 0x20100212
    Memory Manufacturing Date ............ January, 2013
    UPDATE emmc firmware button not active
    Attached Files
    Last edited by Javohir; 02-27-2016, 02:22 PM.
    Tags: None
  • #2
    Is see the speed is 40KHz. This could influence the detection of the eMMC chip as the one manufactured by Samsung, thus such disabled buttons. Don't use 40KHz.

    Comment

    • #3
      Originally posted by Albun View Post
      Is see the speed is 40KHz. This could influence the detection of the eMMC chip as the one manufactured by Samsung, thus such disabled buttons. Don't use 40KHz.
      Open serial port...OK
      Connecting to the RIFF Box...OK
      Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

      Connecting to the SD/eMMC Card...OK
      Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 490 KHz

      Memory Type .......................... eMMC
      Manufacturer ID ...................... 0x15
      OEM/Application ID ................... 0x00
      Product Name ......................... "000000"
      Package .............................. BGA
      User Area Partition Size ............. 0x000200000000 Bytes (8.00 GB)
      Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      RPMB Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
      Write Protection Bits ................ NONE
      Boot Configuration ................... No Boot
      Chip Revision ........................ 0.0
      Multimedia Card Revision ............. 1.5 (eMMC v4.41)
      Serial Number ........................ 0x20100212
      Memory Manufacturing Date ............ January, 2013
      Open serial port...OK
      Connecting to the RIFF Box...OK
      Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

      Connecting to the SD/eMMC Card...OK
      Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 727 KHz

      Memory Type .......................... eMMC
      Manufacturer ID ...................... 0x15
      OEM/Application ID ................... 0x00
      Product Name ......................... "000000"
      Package .............................. BGA
      User Area Partition Size ............. 0x000200000000 Bytes (8.00 GB)
      Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      RPMB Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
      Write Protection Bits ................ NONE
      Boot Configuration ................... No Boot
      Chip Revision ........................ 0.0
      Multimedia Card Revision ............. 1.5 (eMMC v4.41)
      Serial Number ........................ 0x20100212
      Memory Manufacturing Date ............ January, 2013
      Open serial port...OK
      Connecting to the RIFF Box...OK
      Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

      Connecting to the SD/eMMC Card...OK
      Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

      Memory Type .......................... eMMC
      Manufacturer ID ...................... 0x15
      OEM/Application ID ................... 0x00
      Product Name ......................... "000000"
      Package .............................. BGA
      User Area Partition Size ............. 0x000200000000 Bytes (8.00 GB)
      Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      RPMB Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
      Write Protection Bits ................ NONE
      Boot Configuration ................... No Boot
      Chip Revision ........................ 0.0
      Multimedia Card Revision ............. 1.5 (eMMC v4.41)
      Serial Number ........................ 0x20100212
      Memory Manufacturing Date ............ January, 2013
      Open serial port...OK
      Connecting to the RIFF Box...OK
      Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

      Connecting to the SD/eMMC Card...OK
      Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 2.50 MHz

      Memory Type .......................... eMMC
      Manufacturer ID ...................... 0x15
      OEM/Application ID ................... 0x00
      Product Name ......................... "000000"
      Package .............................. BGA
      User Area Partition Size ............. 0x000200000000 Bytes (8.00 GB)
      Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      RPMB Partition Size .................. 0x000000100000 Bytes (1.00 MB)
      OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
      Write Protection Bits ................ NONE
      Boot Configuration ................... No Boot
      Chip Revision ........................ 0.0
      Multimedia Card Revision ............. 1.5 (eMMC v4.41)
      Serial Number ........................ 0x20100212
      Memory Manufacturing Date ............ January, 2013
      same problem in other clock speeds, at me 10 kom connected in CMD, DATA it is normal or need 100 ohm?

      Comment

      • #4
        So in all speeds (as you've posted in logs) the Update Firmware button is disabled, right?
        If this is ISP connection, then 100-200Ohm pull-ups shall be used.
        If the eMMC is in adapter (direct connection) then no need for pull-ups.

        Comment

        • #5


          and search on google: Step by step manual how to repair KMVYL000LM-B503 in pictures.

          Comment

          • #6
            Picture is ok, but one must understand, that pull-up voltage is not 1.8V, but = VCCIO (which is not always 1.8V)

            Comment

            • #7
              direct connection, without pull-ups not detecting always error
              Open serial port...OK
              Connecting to the RIFF Box...OK
              Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

              Connecting to the SD/eMMC Card...ERROR
              Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 533 KHz

              Connecting to the SD/eMMC Card Failed (ERR[0075], POS[000B])
              i am changed resistors 100 ohm, emmc connected
              Open serial port...OK
              Connecting to the RIFF Box...OK
              Firmware Version: 1.38.5b, JTAG Manager Version: 1.57 [BETA 3]

              Connecting to the SD/eMMC Card...OK
              Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 960 KHz

              Memory Type .......................... eMMC
              Manufacturer ID ...................... 0x15
              OEM/Application ID ................... 0x00
              Product Name ......................... "000000"
              Package .............................. BGA
              User Area Partition Size ............. 0x000200000000 Bytes (8.00 GB)
              Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
              RPMB Partition Size .................. 0x000000100000 Bytes (1.00 MB)
              OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
              Write Protection Bits ................ NONE
              Boot Configuration ................... No Boot
              Chip Revision ........................ 0.0
              Multimedia Card Revision ............. 1.5 (eMMC v4.41)
              Serial Number ........................ 0x20100212
              Memory Manufacturing Date ............ January, 2013
              same problem UPDATE emmc firmware button not active all speeds !
              Last edited by Javohir; 02-28-2016, 02:40 PM.

              Comment

              • #8
                KMVTU000LM-B503 problem with fiwmware update, connected tp to gnd
                scan
                Open serial port...OK
                Connecting to the RIFF Box...OK
                Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

                Connecting to the SD/eMMC Card...OK
                Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 649 KHz

                Memory Type .......................... eMMC
                Manufacturer ID ...................... 0x15
                OEM/Application ID ................... 0x00
                Product Name ......................... "000000"
                Package .............................. BGA
                User Area Partition Size ............. 0x000400000000 Bytes (16.00 GB)
                Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
                RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
                OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
                Write Protection Bits ................ NONE
                Boot Configuration ................... No Boot
                Chip Revision ........................ 5.6
                Multimedia Card Revision ............. 1.5 (eMMC v4.41)
                Serial Number ........................ 0x20110726
                Memory Manufacturing Date ............ June, 2021
                update firmware with *.*riffmmcfw file!
                Open serial port...OK
                Connecting to the RIFF Box...OK
                Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

                Connecting to the SD/eMMC Card...OK
                Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 421 KHz

                Detected eMMC Chip, ID: 0x15/0x00 (000000), User Area Partition = 0x000400000000 Bytes (16.00 GB)

                Current Firmware Hash Code: A15E0000B75E0000D35E0000E75E0000FD5E0000075F000011 5F0000255F0000

                Preparing eMMC Core F/W Update...OK (Completed in 00:18.812)
                Uploading eMMC Core Firmware Data...OK (Completed in 00:02.641)
                Waiting eMMC Core Internal Reflashing Done...ERROR
                ERROR: Waiting eMMC Core Internal Reflashing Failed(ERR[0071], POS[0001])

                Comment

                • #9
                  with bin file all is ok
                  Open serial port...OK
                  Connecting to the RIFF Box...OK
                  Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

                  Connecting to the SD/eMMC Card...OK
                  Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 421 KHz

                  Detected eMMC Chip, ID: 0x15/0x00 (000000), User Area Partition = 0x000400000000 Bytes (16.00 GB)

                  Current Firmware Hash Code: A15E0000B75E0000D35E0000E75E0000FD5E0000075F000011 5F0000255F0000

                  Preparing eMMC Core F/W Update...OK (Completed in 00:18.813)
                  Uploading eMMC Core Firmware Data...OK (Completed in 00:02.625)
                  Waiting eMMC Core Internal Reflashing Done...OK (Completed in 00:00.109)
                  Restore the CID Register...OK (Completed in 00:00.062)

                  Current Firmware Hash Code: 31D704004BD7040079D70400F7D8040011D9040017D904001D D9040035D90400

                  The eMMC Core Firmware is updated successfully.
                  .
                  how to fix product code after fiwmware update?

                  Open serial port...OK
                  Connecting to the RIFF Box...OK
                  Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

                  Connecting to the SD/eMMC Card...OK
                  Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 421 KHz

                  Memory Type .......................... eMMC
                  Manufacturer ID ...................... 0x15
                  OEM/Application ID ................... 0x00
                  Product Name ......................... "000000"
                  Package .............................. BGA
                  User Area Partition Size ............. 0x000400000000 Bytes (16.00 GB)
                  Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
                  RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
                  OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
                  Write Protection Bits ................ NONE
                  Boot Configuration ................... No Boot
                  Chip Revision ........................ 5.6
                  Multimedia Card Revision ............. 1.5 (eMMC v4.41)
                  Serial Number ........................ 0x20110726
                  Memory Manufacturing Date ............ June, 2021

                  Comment

                  • #10
                    its not ok. you're emmc now in firmware update mode.
                    User Area Partition Size ............. 0x000400000000 Bytes (16.00 GB)
                    Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
                    RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
                    its wrong addreses

                    Comment

                    • #11
                      Originally posted by 0xMihalich View Post
                      its not ok. you're emmc now in firmware update mode.

                      its wrong addreses
                      how to know the right addresses and right mod?????

                      Comment

                      • #12
                        It is wrong partition sizes reported, not the addresses.
                        ICQ: 299-912-089
                        QQ: 1634811353

                        Comment

                        • #13
                          Originally posted by Legija View Post
                          It is wrong partition sizes reported, not the addresses.
                          bro! KMVTU000LM-B503.bin firmware tested? after firmware update no product code!

                          Comment

                          • #14
                            Originally posted by Javohir View Post
                            bro! KMVTU000LM-B503.bin firmware tested? after firmware update no product code!
                            yes, i have same problem brother for more than 1 tipy eMMC...

                            but for now, you can fixed use another tool brother, just write/update firmware with another tool, and back normal.
                            * read firmware use riff >> write/update firmware use riff >> result 00000
                            " and to fixed this time"
                            * write/update firmware use AT* >> normal

                            in this case my be riif box need time to make fixed this bug, because this beta test version, so need time to make public release

                            so we just hope riff box can make fixed and can make us happy

                            Br,
                            Last edited by mgall; 03-11-2016, 12:12 PM.

                            Comment

                            • #15
                              I have the same problem with some samsung chips. All of them have broken SMART.

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X

                              We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                              By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                              I Agree