Important information related to RIFF Box eMMC support

[Javohir]

KMVIS000LM-B503
read info

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 649 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "VIS00M"
Package .............................. BGA
User Area Partition Size ............. 0x0003AB400000 Bytes (14.68 GB)
Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 4Bit)
Chip Revision ........................ 0.9
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0xDD02007A
Memory Manufacturing Date ............ March, 2012

read firmware!
note: emmc fully worked!

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 649 KHz

Detected eMMC Chip, ID: 0x15/0x00 (VIS00M), User Area Partition = 0x0003AB400000 Bytes (14.68 GB)

Reading the [KMVIS000LM-B503] eMMC Core Firmware...OK
Current Firmware Hash Code: EB1CC10FD04E68CFD407C370232D8DB8928BCE3BCBB98E71A2 6BC0BCC38D5D68
Saved to File: [C:\Documents and Settings\user\Рабочий стол\KMVIS000LM-B503_Firmware[EB1CC10F].riffmmcfw]

[nicolayer]

kmvyl000lm-b503

[nicolayer]

kmv3u000lm-b304

[remark]

Kmk7u000vm-b309(k7u00m)

[Sedy]

Help me i need Firmware for KLMAG2GE4A-A002

[drjaved]

KMVTU000LM-B503 9300 7100 emmc firmware

tested............and working

KMVTU000LM-B503_Firmware[D5D1303D].rar

[0xMihalich]

Help me i need Firmware for KLMAG2GE4A-A002

This EMMC not possible firmware update when firmware is bricked. I have 10 pieces bricked KLMAG2GE4A-A002 and no solution for solve this problem... z3x, atf, RIFF don't repair firmware

Открытие порта...OK
Подключение к RIFF Боксу...OK
Версия Прошивки: 1.38.6b, Версия JTAG Manager: 1.57 [BETA 4]

Connecting to the SD/eMMC Card...OK
Выставленное I/O Напряжение 2.81V, SD_CLK Frequency is 649 KHz

Detected eMMC Chip, ID: 0x15/0x00 (000000), User Area Partition = 0x000400000000 Bytes (16.00 GB)

Current Firmware Hash Code: A15E0000B75E0000D35E0000E75E0000FD5E0000075F000011 5F0000255F0000

Preparing eMMC Core F/W Update...OK (Завершено за 00:38.610)
Uploading eMMC Core Firmware Data...OK (Завершено за 00:01.779)
Waiting eMMC Core Internal Reflashing Done...ОШИБКА
ERROR: Waiting eMMC Core Internal Reflashing Failed(ERR[0071], POS[0001])

[0xMihalich]

KLMAG2WE4A-A002

Connecting to the SD/eMMC Card...OK
Выставленное I/O Напряжение 2.81V, SD_CLK Frequency is 649 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "MAG2WA"
Package .............................. BGA
User Area Partition Size ............. 0x0003AB400000 Bytes (14.68 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 4Bit)
Chip Revision ........................ 0.2
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0xC20FDA95
Memory Manufacturing Date ............ February, 2014

[Sedy]

this emmc not possible firmware update when firmware is bricked. I have 10 pieces bricked klmag2ge4a-a002 and no solution for solve this problem... Z3x, atf, riff don't repair firmware

Михалыч спасибо за ответ, но может скинешь прошивку, вдруг чем черт не шутит. Klmag2ge4a-a002

[0xMihalich]

Михалыч спасибо за ответ, но может скинешь прошивку, вдруг чем черт не шутит. Klmag2ge4a-a002

Да бесполезно говорю же... На днях привезут два N8000 на одном вроде EMMC живая солью значит с нее дамп. На 64Gb хорошо восстанавливаются лучше их делай=) Вобще у меня в продаже эти микросхемы на данный момент все раскупили. Закупаю в китае из 10 минимум две бракованные... Если планшет N8000 рекомендую ту что выложил постом выше поставить либо с N5100 KLMAG2GE2A-A001 они восстанавливаются без проблем. Ну и как вариант заменить на VTU00M (говорят подходит на последней прошивке хотя у меня завести не получилось)

[Legija]

Please use this topic ONLY to post photos of eMMC-s and firmware dumps.

[Javohir]

KMN5X000ZM-B209

read info

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 649 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "N5XZAB"
Package .............................. BGA
User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000080000 Bytes (512.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
Chip Revision ........................ 0.4
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x8873C441
Memory Manufacturing Date ............ July, 2014

read firmware

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 649 KHz

Detected eMMC Chip, ID: 0x15/0x00 (N5XZAB), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Reading the [KMN5X000ZM-B209] eMMC Core Firmware...OK
Saved to File: [C:\Documents and Settings\user\Рабочий стол\KMN5X000ZM-B209_Firmware[].riffmmcfw]

[deepmobile]

Please post video how to upgrade my riff box around 4 month old
Thanks

[12com]

Hello dear users !

This topic will serve as initial guide for RIFF Box eMMC ISP/Direct functionality. This is not regular update, but rather a major upgrade.
As such, it will come free for all RIFF Boxes registered in last 6 months, and of course for all new RIFF Box customers.

To prepare everything on Your side for this upgrade, You'll need the following:

• RJ45 cable
• 2x100 ohms resistors
• External source for VCC and VCCQ (Optional)
• Moorc adapters (Optional)
• Activation credits (If Your box is older than 6 months)

RJ45 cable is required to connect RIFF Box to eMMC as RIFF Box RJ45 port is used for this function.

2x100 Ohms resistors are required as pull up, to increase signal levels and improve stability.



Extarnal source for VCC and VCCQ is required in case that You don't want to open Your RIFF Box, in order to connect RIFF Box internal VCC voltage source. We know that there are already some adapters on market, which offer this function.


Moorc adapters are well known, and they offer best at price range.



Activation credits You can get in exchange for some money. We have too many of those, and we will be happy to exchange some of them to real money.



RIFF Box RJ45 port pinout:

1-NC
2-SD_CLK
3-SD_DAT0
4-SD_CMD
5-NC
6-NC
7-NC
8-GND
VCC pin is located on RIFF Box motherboard, bottom side. You can locate it if You check attached photo.

Pull up resistors should be connected from VCCQ to both SD_CMD and SD_DAT0 lines.

Pull up resistors should be connected from VCCQ to both SD_CMD and SD_DAT0 lines which part???

[vit1974]

Pull up resistors should be connected from VCCQ to both SD_CMD and SD_DAT0 lines which part???

Unlock Forum - RIFF Box support forum