Beta test reports

[Legija]

Hi,
When reporting Your tests, please follow these guidelines:

- Connection method (ISP on board or direct eMMC connection via adaptor)
- If You use ISP, attach pinout which You're using
- VCC and VCCQ source
- Brand/model of phone and brand/model of eMMC
- If possible, status of tested chip and phone - is it working, partially working or dead, and if it's dead history of device if You know it.

I see that some users have no problems to connect while other users cannot connect anything. This is probably due to wrongly connected RJ45 or wrong eMMC or ISP pinout.

Please, try to be as informative as possible, it will help us find and resolve problems much faster.

[tofel155]

please delete this post. now its working

[Legija]

Server was stopped, now is back, so it should be okay.

[4G-TELECOM]

Samsung i9082 orations


Conecting with Riff box

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "M8G1WA"
Package .............................. BGA
User Area Parition Size .............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x50088B9E
Memory Manufacturing Date ............ March, 2014

Read Boot Partition1
Please wait, saving data...OK
Saved to File: C:\Documents and Settings\Administrator\Desktop\New Folder\i9082_Boot Area Partition 1.bin
Completed in 00:00:00.047 (Average Transfer Rate: 43574.47 kB/s)

Read boot partition 2

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

RPMB Area Partition Read

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.28V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Reading "RPMB Area Partition" address space from 0x000000000000 to 0x00000001FFFF
Completed in 00:00:01.328 (Average Transfer Rate: 96.39 kB/s

Emmc Smart info

Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.29V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Reading SMART Info from Samsung eMMC Chip...OK

Super Block Size ..................... 0x00300000 Bytes
Super Page Size ...................... 0x00004000 Bytes
Optimal Write Size ................... 0x00004000 Bytes
Number of Banks ...................... 1
Bank0 Init Bad Block ................. 3
Bank0 Runtime Bad Block .............. 0
Bank0 Remain Reserved Block .......... 67
Max Erase Count ...................... 10483
Min Erase Count ...................... 321
Avg Erase Count ...................... 907
Read Reclaim Count ................... 9
Optimal Trim Size .................... 0x00004000 Bytes
Hash Code ............................ DFA59A9F510AA07917530586BE632CE64E922E6610F2B65C2C 9D79CACCB34B52
Max Erase Count (SLC) ................ 10483
Min Erase Count (SLC) ................ 322
Avg Erase Count (SLC) ................ 2187
Max Erase Count (MLC) ................ 381
Min Erase Count (MLC) ................ 321
Avg Erase Count (MLC) ................ 350

[karabzn]

Noted Sir! i will upload the P5100 isp test results this afternoon.

[bagudung]

LENOVO k900

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "MAG2GA"
Package .............................. BGA
User Area Parition Size .............. 0x0003A3E00000 Bytes (14.56 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 1.5
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0xFE1E4798
Memory Manufacturing Date ............ November, 2012

[bagudung]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz
LENOVO K900 SETING BOOT OPERATION

Detected eMMC Chip, ID: 0x15/0x00 (MAG2GA), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)

Setting Boot Operation Mode...OK

[bagudung]

P3100 WRITE DUMP 256MB DONE


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (MAG2GA), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)

Writting "User Area Partition" memory from 0x000000000000 to 0x00000FFFFFFF

[DR.DEATH]

Worked removed emmc from sony z
direct emmc
VCC=VCCQ=3V3 FROM BOX

READ INFO IS OK

 Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "MAG2GA"
Package .............................. BGA
User Area Parition Size .............. 0x0003A3E00000 Bytes (14.56 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.4
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0xF91944DF
Memory Manufacturing Date ............ May, 2013

READ 1MB PROBLEM AND MUST RECONNECT THE BOX

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.29V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (MAG2GA), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)

Reading "User Area Partition" address space from 0x000000100000 to 0x0000001FFFFF
Failed to receive answer to READ command.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...ERROR
ERROR: No response from the RIFF Box.

[unicore]

LENOVO k900

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "MAG2GA"
Package .............................. BGA
User Area Parition Size .............. 0x0003A3E00000 Bytes (14.56 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 1.5
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0xFE1E4798
Memory Manufacturing Date ............ November, 2012

to begudung..

u can dump boot1,2,rpmb lenovo k900 with good file? can u upl thats , i have k900 with cloverviewplus mode after changed emmc. and i will try with riff dump file. and will give report after execute my k900.

thanks before

[alexjuve42]

i8262

samsung i8262
status :dead and damage board
i use external power for vcc and qvcc
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.4b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...ERROR
ERROR: Set I/O Voltage to 0.00V failed. Real reading is 1.34V

Memory Type .......................... Unknown Memory
Manufacturer ID ...................... 0xE8
OEM/Application ID ................... " |"
Product Name ......................... " b4."
Package .............................. Removable
User Area Parition Size .............. 0x000000000000 Bytes (0.00 KB)
OCR Register ......................... 0x776D7269 (High Voltage)
Write Protection Bits ................ Temporary
Chip Revision ........................ 3.8
Serial Number ........................ 0x332E3120
Memory Manufacturing Date ............ March, 2087

[vexian]

Xiaomi mi3

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.29V, SD_CLK Frequency is 727 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x45
OEM/Application ID ................... 0x00
Product Name ......................... "SEM16G"
Package .............................. BGA
User Area Parition Size .............. 0x0003AB400000 Bytes (14.68 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from User Area (Bus Width = 1Bit)
Chip Revision ........................ 0.7
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0x0092FE28
Memory Manufacturing Date ............ April, 2014

[rickiy zhiyan]

rj45 not dtect help
Connecting to the SD/eMMC Card...ERROR
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Connecting to the SD/eMMC Card Failed (ERR[0071], POS[0001])

[printis]

listened hopefully to help us more details

[VIPER_GE]

P5100 isp emmc

connected directly to eMMC Error 404 (Not Found)!!1 tab working condition but, not recognised from PC, uncnown device, also viruses inside, here info Error 404 (Not Found)!!1