Announcement

Collapse
No announcement yet.

v1.57 does (not) work :)

Collapse
X
Collapse
 
  • Page of 5
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • #16
    HTC Desire U ISP

    Dead eMMC
    Code:
    Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38, JTAG Manager Version: 1.57

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.34V, SD_CLK Frequency is 1.275 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x65
OEM/Application ID ................... 0x6F
Product Name ......................... "M MORN"
Package .............................. Removable
User Area Parition Size .............. 0x000008000000 Bytes (128.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Chip Revision ........................ 4.6
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x00010000
Memory Manufacturing Date ............ January, 2013

    Comment

    • #17
      Connecting to the SD/eMMC Card...ERROR
      WARNING: Embedded I/O Voltage is overriden to 1.60V
      ERROR: Set I/O Voltage to 0.00V failed. Real reading is 1.34V

      help me please,

      Comment

      • #18
        Originally posted by rickiy zhiyan View Post
        Connecting to the SD/eMMC Card...ERROR
        WARNING: Embedded I/O Voltage is overriden to 1.60V
        ERROR: Set I/O Voltage to 0.00V failed. Real reading is 1.34V

        help me please,
        Uncheck overrides on advanced settings.
        ICQ: 299-912-089
        QQ: 1634811353

        Comment

        • #19
          Kmnjs000zm-b205

          Code:
          Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "NJS00M"
Package .............................. BGA
User Area Parition Size .............. 0x0000E9000000 Bytes (3.64 GB)
Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
Chip Revision ........................ 0.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x14122F39
Memory Manufacturing Date ............ August, 2013
          Code:
          Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (NJS00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Reading SMART Info from Samsung eMMC Chip...OK

Super Block Size ..................... 0x00200000 Bytes
Super Page Size ...................... 0x00004000 Bytes
Optimal Write Size ................... 0x00004000 Bytes
Number of Banks ...................... 1
Bank0 Init Bad Block ................. 0
Bank0 Runtime Bad Block .............. 1
Bank0 Remain Reserved Block .......... 28
Max Erase Count ...................... 145
Min Erase Count ...................... 0
Avg Erase Count ...................... 15
Read Reclaim Count ................... 0
Optimal Trim Size .................... 0x00004000 Bytes
Hash Code ............................ 4FA8409C7705875AE084E253F9324A342B7C608B1B9017DAEF7E896C91CFFBFD
Max Erase Count (SLC) ................ 70
Min Erase Count (SLC) ................ 0
Avg Erase Count (SLC) ................ 30
Max Erase Count (MLC) ................ 145
Min Erase Count (MLC) ................ 0
Avg Erase Count (MLC) ................ 14
          Read eMMC failed 2.5MHz
          Code:
          Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (NJS00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Reading "User Area Partition" address space from 0x000000000000 to 0x0000E8FFFFFF
Failed to receive answer to READ command.
          Read OK at lower frequencies
          Code:
          Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (NJS00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Reading "User Area Partition" address space from 0x000000000000 to 0x0000E8FFFFFF
ERROR: Forced to Terminate. Terminated at 0x000002340000


- wait a long time:)

          Comment

          • #20
            Sd5dh26a-4g

            Code:
            Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x45
OEM/Application ID ................... 0x00
Product Name ......................... "SEM04G"
Package .............................. BGA
User Area Parition Size .............. 0x0000EC000000 Bytes (3.69 GB)
Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 9.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x42F110C5
Memory Manufacturing Date ............ December, 2012

            Comment

            • #21
              Kmvtu000lm-b503

              Code:
              Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "VTU00M"
Package .............................. BGA
User Area Parition Size .............. 0x0003AB400000 Bytes (14.68 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 15.7
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0xDDFC5603
Memory Manufacturing Date ............ 2012
              Code:
              Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (VTU00M), User Area Partition = 0x0003AB400000 Bytes (14.68 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:21.216 (Average Transfer Rate: 96.53 kB/s)

              Comment

              • #22
                Klmbg4geac-b001

                Code:
                Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "MBG4GC"
Package .............................. BGA
User Area Parition Size .............. 0x000747C00000 Bytes (29.12 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.1
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0xA2EC4AE5
Memory Manufacturing Date ............ July, 2013
                Code:
                Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (MBG4GC), User Area Partition = 0x000747C00000 Bytes (29.12 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000003FFFFF
Completed in 00:00:42.447 (Average Transfer Rate: 96.50 kB/s)

                Comment

                • #23
                  Kml5u000hm-b505

                  Code:
                  Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 393 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "L5U00M"
Package .............................. BGA
User Area Parition Size .............. 0x0000E9000000 Bytes (3.64 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.2
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x2F5FA4E0
Memory Manufacturing Date ............ December, 2012
                  Code:
                  Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 585 KHz

Detected eMMC Chip, ID: 0x15/0x00 (L5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Writting "User Area Partition" memory from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:30.451 (Average Transfer Rate: 67.26 kB/s)
                  Code:
                  Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 585 KHz

Detected eMMC Chip, ID: 0x15/0x00 (L5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:31.465 (Average Transfer Rate: 65.09 kB/s)

                  Comment

                  • #24
                    Sdin7du2-8g

                    Direct eMMC, soldering.
                    VCCIO - Riff box (CVCC), VCC - Riff box USB (DC-DC converter 5V-1.8V).
                    Asus Fonepad 7 ME175CG_MB hang on Logo.
                    Bad eMMC.
                    Code:
                    Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x45
OEM/Application ID ................... 0x00
Product Name ......................... "SEM08G"
Package .............................. BGA
User Area Parition Size .............. 0x0001CB800000 Bytes (7.18 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000200000 Bytes (2.00 MB)
General Purpose Partition 1 Size ..... 0x010000000000 Bytes (1024.00 GB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 9.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x016182B8
Memory Manufacturing Date ............ April, 2014
                    No reads, no writes at 2.5 MHz, just at a lower frequencies.
                    Code:
                    Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x45/0x00 (SEM08G), User Area Partition = 0x0001CB800000 Bytes (7.18 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:21.216 (Average Transfer Rate: 96.53 kB/s)
                    Code:
                    Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x45/0x00 (SEM08G), User Area Partition = 0x0001CB800000 Bytes (7.18 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000000FFFFF
Failed to receive answer to READ command.
                    Last edited by ba75; 02-08-2016, 01:38 PM.

                    Comment

                    • #25
                      Ke4cn2h5a

                      Direct eMMC
                      Code:
                      Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x70
OEM/Application ID ................... 0x00
Product Name ......................... "MMC04G"
Package .............................. BGA
User Area Parition Size .............. 0x0000E2C00000 Bytes (3.54 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.3
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0x0A992306
Memory Manufacturing Date ............ February, 2013
                      Read
                      Code:
                      Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x70/0x00 (MMC04G), User Area Partition = 0x0000E2C00000 Bytes (3.54 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:12.855 (Average Transfer Rate: 159.32 kB/s)
                      Code:
                      Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x70/0x00 (MMC04G), User Area Partition = 0x0000E2C00000 Bytes (3.54 GB)

Reading "User Area Partition" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:12.870 (Average Transfer Rate: 159.13 kB/s)
                      Write
                      Code:
                      Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x70/0x00 (MMC04G), User Area Partition = 0x0000E2C00000 Bytes (3.54 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:34.866 (Average Transfer Rate: 58.74 kB/s)
                      Code:
                      Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x70/0x00 (MMC04G), User Area Partition = 0x0000E2C00000 Bytes (3.54 GB)

Writting "User Area Partition" memory from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:10.780 (Average Transfer Rate: 189.98 kB/s)

                      Comment

                      • #26
                        Hi Colleagues

                        i always get this error!

                        Open serial port...OK
                        Connecting to the RIFF Box...OK
                        Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

                        Connecting to the SD/eMMC Card...ERROR
                        Set I/O Voltage reads as 3.28V, SD_CLK Frequency is 2.50 MHz

                        Connecting to the SD/eMMC Card Failed (ERR[0071], POS[0001])


                        or


                        Memory Type .......................... eMMC
                        Manufacturer ID ...................... 0x00
                        OEM/Application ID ................... 0x00
                        Product Name ......................... " "
                        Package .............................. Removable
                        User Area Parition Size .............. 0x000000000000 Bytes (0.00 KB)
                        OCR Register ......................... 0xFFFFFFFF (Dual Voltage, High Capacity)
                        Write Protection Bits ................ NONE
                        Chip Revision ........................ 0.0
                        Multimedia Card Revision ............. 1.0 (eMMC v4.0)
                        Serial Number ........................ 0x00000000
                        Memory Manufacturing Date ............ January, 1997

                        what may be the issue cause with ATF everything works fine!

                        Comment

                        • #27
                          Logic says that two things can be cause.
                          1. RJ45 cable/port
                          2. Box

                          ICQ: 299-912-089
                          QQ: 1634811353

                          Comment

                          • #28
                            Htc one x pj46100 isp

                            Phone works.
                            Code:
                            Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "K3U00M"
Package .............................. BGA
User Area Parition Size .............. 0x0003A3E00000 Bytes (14.56 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 1.5
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x8FB6203F
Memory Manufacturing Date ............ November, 2012
                            Code:
                            Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (K3U00M), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:12.886 (Average Transfer Rate: 158.93 kB/s)
                            Code:
                            Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (K3U00M), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)

Reading "User Area Partition" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:12.886 (Average Transfer Rate: 158.93 kB/s)
                            Code:
                            Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.35V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (K3U00M), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)

Reading SMART Info from Samsung eMMC Chip...OK

Super Block Size ..................... 0x00800000 Bytes
Super Page Size ...................... 0x00008000 Bytes
Optimal Write Size ................... 0x00010000 Bytes
Number of Banks ...................... 2
Bank0 Init Bad Block ................. 4
Bank0 Runtime Bad Block .............. 0
Bank0 Remain Reserved Block .......... 47
Bank1 Init Bad Block ................. 2
Bank1 Runtime Bad Block .............. 0
Bank1 Remain Reserved Block .......... 49
Max Erase Count ...................... 4525
Min Erase Count ...................... 68
Avg Erase Count ...................... 410
Read Reclaim Count ................... 0
Optimal Trim Size .................... 0x00010000 Bytes
Hash Code ............................ 5EE92388700FB20B4635B6241AC8792E894D842630594A604399C9BEAED540EF
Max Erase Count (SLC) ................ 4525
Min Erase Count (SLC) ................ 4145
Avg Erase Count (SLC) ................ 4385
Max Erase Count (MLC) ................ 376
Min Erase Count (MLC) ................ 68
Avg Erase Count (MLC) ................ 205

                            Comment

                            • #29
                              H26m52103fmr

                              Code:
                              Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x90
OEM/Application ID ................... 0x4A
Product Name ......................... "HAG2e "
Package .............................. BGA
User Area Parition Size .............. 0x0003AB800000 Bytes (14.68 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
Chip Revision ........................ 0.3
Multimedia Card Revision ............. 1.7 (eMMC v5.0)
Serial Number ........................ 0x007A334A
Memory Manufacturing Date ............ June, 2014
                              Code:
                              Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x90/0x4A (HAG2e ), User Area Partition = 0x0003AB800000 Bytes (14.68 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000003FFFFF
Completed in 00:00:25.959 (Average Transfer Rate: 157.79 kB/s)
                              Code:
                              Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x90/0x4A (HAG2e ), User Area Partition = 0x0003AB800000 Bytes (14.68 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000003FFFFF
Completed in 00:00:43.322 (Average Transfer Rate: 94.55 kB/s)

                              Comment

                              • #30
                                Ke4cn2l2sa5h2a

                                Code:
                                Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x70
OEM/Application ID ................... 0x00
Product Name ......................... "MMC04G"
Package .............................. BGA
User Area Parition Size .............. 0x0000E6800000 Bytes (3.60 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
Chip Revision ........................ 5.8
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0x397050C0
Memory Manufacturing Date ............ October, 2014
                                Code:
                                Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.3b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x70/0x00 (MMC04G), User Area Partition = 0x0000E6800000 Bytes (3.60 GB)

Writting "User Area Partition" memory from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:10.733 (Average Transfer Rate: 190.81 kB/s)

                                Comment

                                Previous 1 2 3 4 5 template Next
                                Working...
                                X

                                We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                                By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                                I Agree