Announcement

Collapse
No announcement yet.

GT-I9205 Killed by RIff

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    GT-I9205 Killed by RIff

    Hello team. I got this phone with booting problem. the it was stuck on samsung logo. I flashed with kies and problem it was the same. then I used RIff box to try to fix it and now the phone it is completely DEAD. the wont even turn on. I tried to do the resurect again and now the box wont recogize the phone.

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.37, JTAG Manager Version: 1.56
    Selected Resurrector: [Samsung I9205 V1.0.5113.60621]

    Connecting to the dead body...ERROR
    ERROR: The RTCK Signal does not respond.
    Tags: None
  • #2
    Hi,
    There is no such procedure in JTAG protocol designed to kill device hardware.
    If there is something wrong, it's done by You.
    ICQ: 299-912-089
    QQ: 1634811353

    Comment

    • #3
      Sorry!!

      Originally posted by Legija View Post
      Hi,
      There is no such procedure in JTAG protocol designed to kill device hardware.
      If there is something wrong, it's done by You.

      Sorry my bad, you are correct I forgot that I cant use new firmware version with old resurrector files. I just re-installed this box again and I tough it was updated but I was wrong. all resurector here are old and I thing that the riff box should advice about that I mean software compatibility. for those one like me that dont know too much about this. in the past you were updating this project and now it seems like you dont care anymore. This is a very good project I fixed a lot phone in the past. @Legija you are good in this but if you dont keep updating like others project (e.x. octoplus, z3x, Advance box) thi would be a dead project. Now I know that all these Resurrectos files are for OLD FIRMWARE but I had to damaged this phone to know it.

      BR
      tukara

      Comment

      • #4
        What You mean with "resurrectors for old firmware" ?
        ICQ: 299-912-089
        QQ: 1634811353

        Comment

        • #5
          Seriously???

          Originally posted by Legija View Post
          What You mean with "resurrectors for old firmware" ?
          I mean for samsung 4.0 , 4.1 etc.. new ones 4.4.4, 4.4.2 etc.
          If I'm wrong why now the phone wont boot if everything was good. your software says reserrect complete. where

          where your software store the old log ? I cant find it. tell me where it is and I'll the log where says RESURRECT COMPLETE without any error. AND NOW THE PHONE IT IS DEAD.

          Comment

          • #6
            Full Log

            [4/22/2015 11:52:23 AM] [START OPERATION_ID = RESURRECT]
            [4/22/2015 12:13:30 PM] Open serial port...OK
            [4/22/2015 12:13:30 PM] Connecting to the RIFF Box...OK
            [4/22/2015 12:13:30 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
            [4/22/2015 12:13:30 PM] Selected Resurrector: [Samsung I9205 V1.0.5113.60621]
            [4/22/2015 12:13:30 PM]
            [4/22/2015 12:13:30 PM] Connecting to the dead body...OK
            [4/22/2015 12:13:30 PM] Detected dead body ID: 0x308930E1 - CORRECT!
            [4/22/2015 12:13:30 PM] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
            [4/22/2015 12:13:30 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
            [4/22/2015 12:13:30 PM]
            [4/22/2015 12:13:30 PM] Resurrection sequence started.
            [4/22/2015 12:13:30 PM] Establish communication with the phone...OK
            [4/22/2015 12:13:30 PM] Initializing internal hardware configuration...OK
            [4/22/2015 12:13:30 PM] Uploading resurrector data into memory...OK
            [4/22/2015 12:13:30 PM] Starting communication with resurrector...OK
            [4/22/2015 12:13:30 PM]
            [4/22/2015 12:13:30 PM] Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G92, 0x0003AB400000 Bytes = 14.68 GB)
            [4/22/2015 12:13:30 PM] Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G92, 0x000000400000 Bytes = 4.00 MB)
            [4/22/2015 12:13:30 PM]
            [4/22/2015 12:13:30 PM] No Resurrection Data is available for the eMMC Chip with Capacity = 14.68GB
            [4/22/2015 12:13:30 PM] WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 7,28GB
            [4/22/2015 12:13:30 PM]
            [4/22/2015 12:13:30 PM] Flashing the dead body...OK
            [4/22/2015 12:13:30 PM] Resurrection complete!
            [4/22/2015 12:13:30 PM] [FINISH OPERATION_ID = RESURRECT]


            after thtat I got this :

            [4/22/2015 1:27:21 PM] [START OPERATION_ID = RESURRECT]
            [4/22/2015 1:27:22 PM] Open serial port...OK
            [4/22/2015 1:27:22 PM] Connecting to the RIFF Box...OK
            [4/22/2015 1:27:22 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
            [4/22/2015 1:27:22 PM] Selected Resurrector: [Samsung I9205 V1.0.5113.60621]
            [4/22/2015 1:27:22 PM]
            [4/22/2015 1:27:22 PM] Connecting to the dead body...ERROR
            [4/22/2015 1:27:22 PM] ERROR: The RTCK Signal does not respond.
            [4/22/2015 1:27:22 PM] [FINISH OPERATION_ID = RESURRECT]
            Last edited by tukara; 04-24-2015, 12:11 PM.

            Comment

            • #7
              Originally posted by tukara View Post
              [4/22/2015 11:52:23 AM] [START OPERATION_ID = RESURRECT]
              [4/22/2015 12:13:30 PM] Open serial port...OK
              [4/22/2015 12:13:30 PM] Connecting to the RIFF Box...OK
              [4/22/2015 12:13:30 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
              [4/22/2015 12:13:30 PM] Selected Resurrector: [Samsung I9205 V1.0.5113.60621]
              [4/22/2015 12:13:30 PM]
              [4/22/2015 12:13:30 PM] Connecting to the dead body...OK
              [4/22/2015 12:13:30 PM] Detected dead body ID: 0x308930E1 - CORRECT!
              [4/22/2015 12:13:30 PM] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
              [4/22/2015 12:13:30 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
              [4/22/2015 12:13:30 PM]
              [4/22/2015 12:13:30 PM] Resurrection sequence started.
              [4/22/2015 12:13:30 PM] Establish communication with the phone...OK
              [4/22/2015 12:13:30 PM] Initializing internal hardware configuration...OK
              [4/22/2015 12:13:30 PM] Uploading resurrector data into memory...OK
              [4/22/2015 12:13:30 PM] Starting communication with resurrector...OK
              [4/22/2015 12:13:30 PM]
              [4/22/2015 12:13:30 PM] Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G92, 0x0003AB400000 Bytes = 14.68 GB)
              [4/22/2015 12:13:30 PM] Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G92, 0x000000400000 Bytes = 4.00 MB)
              [4/22/2015 12:13:30 PM]
              [4/22/2015 12:13:30 PM] No Resurrection Data is available for the eMMC Chip with Capacity = 14.68GB
              [4/22/2015 12:13:30 PM] WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 7,28GB
              [4/22/2015 12:13:30 PM]
              [4/22/2015 12:13:30 PM] Flashing the dead body...OK
              [4/22/2015 12:13:30 PM] Resurrection complete!
              [4/22/2015 12:13:30 PM] [FINISH OPERATION_ID = RESURRECT]


              after thtat I got this :

              [4/22/2015 1:27:21 PM] [START OPERATION_ID = RESURRECT]
              [4/22/2015 1:27:22 PM] Open serial port...OK
              [4/22/2015 1:27:22 PM] Connecting to the RIFF Box...OK
              [4/22/2015 1:27:22 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
              [4/22/2015 1:27:22 PM] Selected Resurrector: [Samsung I9205 V1.0.5113.60621]
              [4/22/2015 1:27:22 PM]
              [4/22/2015 1:27:22 PM] Connecting to the dead body...ERROR
              [4/22/2015 1:27:22 PM] ERROR: The RTCK Signal does not respond.
              [4/22/2015 1:27:22 PM] [FINISH OPERATION_ID = RESURRECT]
              Bro reball eMMC and try connect to Jtag if you have same error No Resurrection Data is available for the eMMC Chip with Capacity = 14.68GB
              change emmc!

              Comment

              • #8
                Originally posted by Javohir View Post
                Bro reball eMMC and try connect to Jtag if you have same error No Resurrection Data is available for the eMMC Chip with Capacity = 14.68GB
                change emmc!
                you are very wrong and pls do not tell him he need reball emmc etc. ... he destroy the phone and you help it then ???


                @tukara

                you need good dump from working 16gb phone, best is 512mb from Rom1 and 4mb from rom2 ... do you have a isp box? check direkt connection to emmc ...
                Last edited by benbyben; 04-26-2015, 12:26 AM.

                Comment

                • #9
                  Thanks

                  Originally posted by benbyben View Post
                  you are very wrong and pls do not tell him he need reball emmc etc. ... he destroy the phone and you help it then ???


                  @tukara

                  you need good dump from working 16gb phone, best is 512mb from Rom1 and 4mb from rom2 ... do you have a isp box? check direkt connection to emmc ...
                  @benbyben Thanks for your help. Finally some one gave me a logic and usefull answer. I dont have ISP box but I have ATF I think that one can what you say. thanks in advance.

                  BR
                  Tukara

                  Comment

                  • #10
                    @Legija I cant establish connection, can you help me please ?

                    Comment

                    Previous template Next
                    Working...
                    X

                    We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                    By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                    I Agree