Lumia 625 dead boot repair (qualcomm hs-usb qloader 9008)

[riteshgpt60]

Hi,

I have one nokia windows phone 625 phone lock ,

after flashing, it goes off by mistakely disconnect the device

and its now showing qualcomm hs-usb qloader 9008 in device manager.

I try to resurrect with riff and it showing me this error :-


Open serial port...OK Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]
Connecting to the dead body...OK
Detected dead body ID: 0x207220E1 - WRONG!!!
ERROR: Current ID does not belong to the Nokia Lumia 625 family.




Need help!

[Legija]

Box service ->Advanced Settings -> Ignore TARGET IDCODE check.

It should work after that.

[riteshgpt60]

Box service ->Advanced Settings -> Ignore TARGET IDCODE check.

It should work after that.

Hi, I tried the way you told but it shows like this -

Open serial port...OK Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]
Connecting to the dead body...OK
Detected dead body ID: 0x207220E1 - IGNORED!
WARNING: Embedded I/O Voltage is overriden to 3.30V
Set I/O Voltage reads as 3.30V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
WARNING: Reset Override to: [No RESET] Resurrection sequence started. Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.

Need help.

[Legija]

Hi, I tried the way you told but it shows like this -


WARNING: Reset Override to: [No RESET] Resurrection sequence
Need help.

Of course it doesnt work without reset.

[riteshgpt60]

Of course it doesnt work without reset.

Hi,

It showing this now :-

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]

Connecting to the dead body...OK
Detected dead body ID: 0x207220E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data checksum.

Need help.

br,

[Legija]

RIFF JTAG Box FAQ - Error: Wrong DCC Data Checksum .

[riteshgpt60]

RIFF JTAG Box FAQ - Error: Wrong DCC Data Checksum .

Hi thanks,
Resurrection completed but cant flash, it still showing, "qualcomm q-usb" on device manager.

I tried to flash with infinity best with recover flash but it cant detect.

It showing qualcomm q-usb on device mamager. and phone can't turn on.!!
Need help

[Legija]

Hi thanks,
Resurrection completed but cant flash, it still showing, "qualcomm q-usb" on device manager.

I tried to flash with infinity best with recover flash but it cant detect.

It showing qualcomm q-usb on device mamager. and phone can't turn on.!!
Need help

And how phone was killed? That is important information.

[riteshgpt60]

And how phone was killed? That is important information.

I flashed with atf and it stopped at 40% , so i disconnect and again when i try to flash , it stuck on 1% while flashing, I disconnect the phone , and it can't power on!!!

I resurrect with riff successfully but it can't detect by atf or infinity best.

It shows only "qualcomm q-usb" on device manager.

[Legija]

In that case it could be some HW problem with the phone.
RIFF resurrector is flashing all bootchain partitions + gpt, and after this phone should start in download mode if there is no other damage.

[riteshgpt60]

In that case it could be some HW problem with the phone.
RIFF resurrector is flashing all bootchain partitions + gpt, and after this phone should start in download mode if there is no other damage.

Hi,

The problem was only phone lock, it stopped while flashing coz my flash file was corrupted.

After resurrect with riff , when i connect usb on phone my device manager on pc stuck , can't "scan for hardware changes" in device manager , I tried on different PC.





Need solution!!!

[riteshgpt60]

In that case it could be some HW problem with the phone.
RIFF resurrector is flashing all bootchain partitions + gpt, and after this phone should start in download mode if there is no other damage.

Hi,

successfully repair with atf,




please fix the bug of this model in riff.

br,

[zintung2911]

thank legija !!! sare guide !!

[zintung2911]

ATF number one lumia !!! .....

[anombase]

mr legija i can not get lumia 625 .dll file on the riff updates manager. pls help me