FORD 6000 CD Radio code

[masterskay62]

Ok ive found the serial , its MO17191 . Dose anyone no the code for this serial?, thanks

Try code 1585

[SittingNow]

Try code 4041

You guys are amazing! Thanks!

[Patrick Spielauer]

Please Help

Hi can you help me with the code for my Puma

serial number is M009122 Part No. 97FP-18C815-DA

Thank you!

[dempsm24]

code for focud 56 plate cd6000

guys

after much pain trying to remove the stereo, i think ive located a serial number, id therefore appreciate the code for v1l646280

made a mess off the facia and the wife WILL kill me so if i dont reply, presume im dead !! thanks in advance

lee

[masterskay62]

Hi can you help me with the code for my Puma

serial number is M009122 Part No. 97FP-18C815-DA

Thank you!

Try code 4903

[JAMES_LEEDS1981]

Help plz

Try code 1585

Thanks for the code , i cant enter it tho. ive looked at other forums for the answer but im confussed, any help plz

[RegWorts]

guys

after much pain trying to remove the stereo, i think ive located a serial number, id therefore appreciate the code for v1l646280

made a mess off the facia and the wife WILL kill me so if i dont reply, presume im dead !! thanks in advance

lee

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

[RegWorts]

Thanks for the code , i cant enter it tho. ive looked at other forums for the answer but im confussed, any help plz

Ford Code Entry Instructions

Once the unit has been turned on the display will show ' CODE - - - -'

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

To save the code press the [ 5 ] key to accept.

The set should now operate.

[JAMES_LEEDS1981]

Ford Code Entry Instructions

Once the unit has been turned on the display will show ' CODE - - - -'

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

To save the code press the [ 5 ] key to accept.

The set should now operate.

So the code is 1585, would i press button 1=once, button 2=five times,button 3=eight times ,button 4=five times then button 5 to accept code.?

[RegWorts]

So the code is 1585, would i press button 1=once, button 2=five times,button 3=eight times ,button 4=five times then button 5 to accept code.?

yes...sometimes it is button 6 to store the code

Make sure the display shows the correct details

[Patrick Spielauer]

Thank you

Try code 4903

Thank you very much, it works

[JAMES_LEEDS1981]

yes...sometimes it is button 6 to store the code

Make sure the display shows the correct details

thanks for the help

[dempsm24]

thanks

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

v271192 many thanks in advance.

[RegWorts]

v271192 many thanks in advance.

Ford V Serial codes are not usually available for free from anywhere on the Internet (unless you can blag it for free from Ford) as access is required to the Ford factory database( via a Ford Dealer)...which is not commercially available as software.

See PM message for cheapest options

Otherwise try your Ford Dealer or a Radio Decoding Service

[dempsm24]

code

Ford V Serial codes are not usually available for free from anywhere on the Internet (unless you can blag it for free from Ford) as access is required to the Ford factory database( via a Ford Dealer)...which is not commercially available as software.

See PM message for cheapest options

Otherwise try your Ford Dealer or a Radio Decoding Service

Reg

thanks for info pal, i have sent u a reply in PM