Announcement

Collapse
No announcement yet.

Philips car400 code needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Juckit
    replied
    I need Help..

    Hi,

    I need help with the code, please
    Nr: GM0400V1739357

    Thanks

    Leave a comment:


  • xela911
    replied
    Originally posted by Sowi
    hi

    Code 8600

    @++
    Thank you!

    I try it!

    Leave a comment:


  • Sowi
    replied
    Originally posted by xela911
    Hi!

    I have an Astra, and a CAR400 radio. I lost the code. Please help me! S/N: GM 0400w2187506

    ThaNK YOU!
    hi

    Code 8600

    @++

    Leave a comment:


  • xela911
    replied
    Help me!

    Hi!

    I have an Astra, and a CAR400 radio. I lost the code. Please help me! S/N: GM 0400w2187506

    ThaNK YOU!

    Leave a comment:


  • EMPHASER
    replied
    Great !

    Originally posted by EMPHASER
    THANKS Man will try - thank you very much !
    BINGO !!!! Thank You very very Much !

    Leave a comment:


  • bcoriolan
    replied
    Help

    Hi guys,

    I just got a old 2001 Opel Astra but my Philips CAR400 is locked(7 SAFE).
    Any chance I could get a code from someone? My serial number is: GM0400Y2701225

    Thanks in advance!

    Leave a comment:


  • EMPHASER
    replied
    Thank you !

    Originally posted by Dekster
    Try code 8877
    THANKS Man will try - thank you very much !

    Leave a comment:


  • Dekster
    replied
    Originally posted by EMPHASER
    GM 0400v1697866

    THANK YOU !!!!
    Try code 8877

    Leave a comment:


  • EMPHASER
    replied
    one more PLEASE

    GM 0400v1697866

    THANK YOU !!!!

    Leave a comment:


  • dj_shima
    replied
    ty so much i did it ^_^ this was sooooooooooooooooo anoying -_- but i did it ^_^

    Leave a comment:


  • GRock
    replied
    Originally posted by dj_shima
    i need help with this philips car 400 i have code but i can't activate this pice of sh** ... i find that i need tu push AS and switch ON radio but still is showing on SAFE and there are no ---- to put code dont know what to do pls help...


    ON


    [ATTACH=CONFIG]4312[/ATTACH]

    on back is:
    1 614 438 philips
    GM 90 506 173 > PA6 - GF15 <


    I did this:

    1. turn radio on
    2. turn it off
    3. press and hold few seconds AS button
    4. turn radio on and then hold AS button for about 3 seconds (you'll hear beep)
    5 You'll see X ---- (x is number of possible tries you yet have to enter the code and ---- are places to enter the code digits)
    6. enter the code (press 1 for selecting first digit, it'll turn to 0 press again and it'll be 1 and so on, when you press "2" button you'll set the second digit and so on...) when you set all 4 digits press and hold AS button.
    7. radio should now be unlocked.

    when i'm finish this:
    4. turn radio on and then hold AS button for about 3 seconds (you'll hear beep) -_- but when i do this there are no beep and no X ----

    it's still showing this:

    [ATTACH=CONFIG]4313[/ATTACH]

    i hope someone will help me

    thank's for your time
    Note that code entry is only possible with the ignition switched on, and in the order shown below.
    If the display shows a number less than 10, and the word SAFE, then the unit may be codelocked.
    If this is the case, leave it switched on for up to two hours and a further attempt at code entry should be possible.


    Code Entry as Follows:

    Turn Off Stereo
    Switch On Ignition (No Need To Start Engine)
    Press & Hold Preset " AS " and
    Switch Radio On - Display Shows
    " SAFE " And Then Shows " 10 - - - - "

    Press preset " 1 " repeatedly for 1st Digit
    Press preset " 2 " repeatedly for 2nd Digit
    Press preset " 3 " repeatedly for 3rd Digit
    Press preset " 4 " repeatedly for 4th Digit

    If the correct code number is now shown
    Press & Hold Preset " AS " Until the Unit Beeps

    Leave a comment:


  • dj_shima
    replied
    need help

    i need help with this philips car 400 i have code but i can't activate this pice of sh** ... i find that i need tu push AS and switch ON radio but still is showing on SAFE and there are no ---- to put code dont know what to do pls help...


    ON




    on back is:
    1 614 438 philips
    GM 90 506 173 > PA6 - GF15 <


    I did this:

    1. turn radio on
    2. turn it off
    3. press and hold few seconds AS button
    4. turn radio on and then hold AS button for about 3 seconds (you'll hear beep)
    5 You'll see X ---- (x is number of possible tries you yet have to enter the code and ---- are places to enter the code digits)
    6. enter the code (press 1 for selecting first digit, it'll turn to 0 press again and it'll be 1 and so on, when you press "2" button you'll set the second digit and so on...) when you set all 4 digits press and hold AS button.
    7. radio should now be unlocked.

    when i'm finish this:
    4. turn radio on and then hold AS button for about 3 seconds (you'll hear beep) -_- but when i do this there are no beep and no X ----

    it's still showing this:



    i hope someone will help me

    thank's for your time

    Leave a comment:


  • Dekster
    replied
    Originally posted by ometo View Post
    PHILIPS 2F3 CAR 400 90 532 621 Made in Germany Barcodes : 9022 213 96752 04 003 9926 2418681 WA049926 Serial number : GM0400X2418681 Please if anyone can give me the code ?
    Link

    Leave a comment:


  • ometo
    replied
    PHILIPS 2F3 CAR 400 90 532 621 Made in Germany Barcodes : 9022 213 96752 04 003 9926 2418681 WA049926 Serial number : GM0400X2418681 Please if anyone can give me the code ?

    Leave a comment:


  • RegWorts
    replied
    Originally posted by atannasskoo View Post
    Hi, I need a code for Philips Car 400.please

    Serial №: GM0400X2329408
    Link

    Leave a comment:

Working...
X