Bosch blaupunkt code

[hay88]

try code 1492 / 9291

if not please check 76403510 0 number. can be found stamped into metal casing.

Hello everyone,
Newbee here, I have an Ignis 2005, just brought it but theres no stereo code, there are some numbers on a sticker here they are

4 6629932 76403510 0
39101-86g10
ID: 39101-86g1
e1 022903 FD492
It says Bosch and mad in malaysia

Fingers crossed hope you can help

[w0z26]

Hello everyone,
Newbee here, I have an Ignis 2005, just brought it but theres no stereo code, there are some numbers on a sticker here they are

4 6629932 76403510 0
39101-86g10
ID: 39101-86g1
e1 022903 FD492
It says Bosch and mad in malaysia

Fingers crossed hope you can help

[hay88]

yes i would try the 24 hours first and are you sure you have the right code.because Blaupunkt Radio / Cassette as fitted to the Citroen Xantia code is NOT the same as the standed BP calculator you can post the bpxxxyxxxxxxx and 7xxx xxx xxx numbers and i can check to see if you have the right code.

It only displays ----
I left it undisturbed for 12 hours or something, but nothing, just ----
Is there a posibility to be broken? A friend of mine who repairs/decodes mobile phones told me that he can try to unblock it phisicaly.... I dont know... I think I'll let it switched on for 24 hours or even more to see what happents, before let my friend open it. (

[dj01fad]

It only displays ----
I left it undisturbed for 12 hours or something, but nothing, just ----
Is there a posibility to be broken? A friend of mine who repairs/decodes mobile phones told me that he can try to unblock it phisicaly.... I dont know... I think I'll let it switched on for 24 hours or even more to see what happents, before let my friend open it. (

[hay88]

If the display shows "----" , then the unit is codelocked, and will have to be left switched on for up to two hours or more to reset and allow code entry again.
Code Entry as Follows:
Switch Radio On - Display Shows
" CodE "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Preset " 6 " to Enter

hello everyone
i have a xantia from 1995, with a blaupunkt ph1 D; the radio is from an older one i guess because it's writtene on it 1992...
the problem is that the radio was blocked since i bought the car, an i used an aftermarket one, but, i want to use this blaupunkt for the keys on the steering wheel; the radio says ----, and does nothing else except power on and off; i found a code calculator on the net, i know the code but i can't enter it; i knew on some models (PH1, but after 1994) you can press 4 and FM to unlock, but at this one doesn't work; i tried to let it without power for an hour, then let it turned on undisturbed for several hous, but still nothnig. so... anyone can help me... please?

[dj01fad]

hello everyone
i have a xantia from 1995, with a blaupunkt ph1 D; the radio is from an older one i guess because it's writtene on it 1992...
the problem is that the radio was blocked since i bought the car, an i used an aftermarket one, but, i want to use this blaupunkt for the keys on the steering wheel; the radio says ----, and does nothing else except power on and off; i found a code calculator on the net, i know the code but i can't enter it; i knew on some models (PH1, but after 1994) you can press 4 and FM to unlock, but at this one doesn't work; i tried to let it without power for an hour, then let it turned on undisturbed for several hous, but still nothnig. so... anyone can help me... please?

[RegWorts]

It is not commercial activity. My hobby is repair only Suzuki Ignis.

Single free code for personal use only

NO TRADERS

[Dmitr]

No Multiple requests on this Forum

NO TRADERS

Single code request for personal use only

It is not commercial activity. My hobby is repair only Suzuki Ignis.

[RegWorts]

I have 4 radio for Suzuki Ignis.
39101-86G10
ID: 39101-86G1
[e1] 022903
Made in malaysia
serial :
5 9693377 7643063510 5 code:8634
7 9009780 7644061510 9 code:3342
5 9697445 7643063510 7 code:????
4 6620841 7643063510 4 code:????

help me please.

No Multiple requests on this Forum

NO TRADERS

Single code request for personal use only

[Dmitr]

I have 4 radio for Suzuki Ignis.
39101-86G10
ID: 39101-86G1
[e1] 022903
Made in malaysia
serial :
5 9693377 7643063510 5 code:8634
7 9009780 7644061510 9 code:3342
5 9697445 7643063510 7 code:????
4 6620841 7643063510 4 code:????

help me please.

Now works fine. Right code! :thumbsup:
I think, that my radio reseted a long time ago, but I'm newbie here. :angelsad2:
I found manual of that radio, that I have press "BAND" for 3 seconds, then on screen appears "10 SAFE". Then enter code, and again "BAND" for 3 sec.
This is manual for the same users like me.

[RegWorts]

I still have a problem. I try everything what RegWorts said:
removed battery for a hour, (clock resets), then swiched on radio (on display "CODE"), left for all night (more than 10 hours) undisturbed, BUT still see "CODE" on display. I tried to insert another radio into it - works with no problem, but original radio - asks code and doesn't let to input any code. Maybe anyone more knows what to do with it?

You may have to leave it SWITCHED ON ...UNDISTURBED for a lot more than 10 hours.

Some radios have to be left for more than 24 hours to reset as it will depend on how many wrong codes have been entered previously.

I still have a problem. I try everything what RegWorts said:
removed battery for a hour, (clock resets), then swiched on radio (on display "CODE"), left for all night (more than 10 hours) undisturbed, BUT still see "CODE" on display. I tried to insert another radio into it - works with no problem, but original radio - asks code and doesn't let to input any code. Maybe anyone more knows what to do with it?

[RegWorts]

Hi for all.
I also have a problems, and I see, that all of you are friendly, and always help for people.
I also have BOSCH- BLaupunkt car radio.
It's serial is 3 1926259 7643063510 3
39101-86G10
022903 Made in Malaysia.

And the second problem is that I can't enter any numbers. It's written "CODE" on display and no action on any button (except POWER).
So please, anyone can help me to solve these 2 problems.
Thanks.

Try code 1490

To reset your radio , remove fuse (or battery ) for 10 minutes,...reconnect then leave SWITCHED ON...UNDISTURBED for several hours ..Then enter code

Hi for all.
I also have a problems, and I see, that all of you are friendly, and always help for people.
I also have BOSCH- BLaupunkt car radio.
It's serial is 3 1926259 7643063510 3
39101-86G10
022903 Made in Malaysia.

And the second problem is that I can't enter any numbers. It's written "CODE" on display and no action on any button (except POWER).
So please, anyone can help me to solve these 2 problems.
Thanks.