Bosch blaupunkt code

[hay88]

If the display continually shows "WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, or the display shows "SECURE" , then the unit will need to be sent to be reset and reprogrammed for use in your car,
full details of this service can be found below

Link

thank you for the code. i havent been able to try it out yet because the radio is STILL saying "secure" it hasnt changed to ask for "code" at all. any ideas why this is happening?? do i have to press something for "code" to appear?? am so VERY confused :/

[lowneman]

thank you for the code. i havent been able to try it out yet because the radio is STILL saying "secure" it hasnt changed to ask for "code" at all. any ideas why this is happening?? do i have to press something for "code" to appear?? am so VERY confused :/

[hay88]

try code 5059

Hi,
I need a code also:
Blaupunkt Bosch
5 9704894 7643063510 2
39101-86G10
ID: 39101-86G1

e1 022903

Thaks in advance
Vera

[RegWorts]

HI, I've got a Nissan Primera (51 plate) and been given a new radio from another primera which has a cd changer. i've gone to fit it and all it says on the screen in "secure". so from reading different forums i'm guessing i now need to input code to suit this radio as it doesnt match the cars. I am sat in car at the moment, waiting to see if it comes up saying "code" so that i can atleast try and input a code but have read that this could take an hour or longer for screen to change :/ !! i would be greatful if anyone can help me out with the code as i have no idea what it is!!!!
the serial codes on the radio are as follows

Blaupunkt Radio

BP9347X1627126
7649347318

i've looked on sites and these are the serial numbers they're asking for, but i dont want to start forking out £10 here and there for codes that may not work. if someone could help me with a code they think will work then i would REALLY appreciate it!!!!!

PLEASE HELP!! 6hr journey tomorrow and at the moment....no music!!!! eeeeek!!!

Try code 6220

[lowneman]

HI, I've got a Nissan Primera (51 plate) and been given a new radio from another primera which has a cd changer. i've gone to fit it and all it says on the screen in "secure". so from reading different forums i'm guessing i now need to input code to suit this radio as it doesnt match the cars. I am sat in car at the moment, waiting to see if it comes up saying "code" so that i can atleast try and input a code but have read that this could take an hour or longer for screen to change :/ !! i would be greatful if anyone can help me out with the code as i have no idea what it is!!!!
the serial codes on the radio are as follows

Blaupunkt Radio

BP9347X1627126
7649347318

i've looked on sites and these are the serial numbers they're asking for, but i dont want to start forking out £10 here and there for codes that may not work. if someone could help me with a code they think will work then i would REALLY appreciate it!!!!!

PLEASE HELP!! 6hr journey tomorrow and at the moment....no music!!!! eeeeek!!!

[w0z26]

just a waiting game now, if anyone else can help it will be much apreciated thankyou

[Vera Kruglova]

Hi,
I need a code also:
Blaupunkt Bosch
5 9704894 7643063510 2
39101-86G10
ID: 39101-86G1

e1 022903

Thaks in advance
Vera

[w0z26]

I have done thanks mate

[hay88]

Try emailing

[email protected]

to see if they can help

Mention this forum

Sorry mate them codes didn't work

[w0z26]

Sorry mate them codes didn't work

[w0z26]

theres only a sticker on the side, no other stamps or marks, been reading a lot of other replys about the suzuki's they appear to be the same.

[w0z26]

Just figured out that if I leave the radio on it will reset itself, the first code didn't work just waiting to try the second

[hay88]

leave turned on untouched until resetplease check that 776403510 too so i can check that code.

Opps just plugged it back in to try the codes but for some reason it comes up with 7 safe on the screen? have I buggared it up?
Thanks for your help hay88

[hay88]

(GB) Theft protection system
1. Switch on ignition.
2. Switch on the radio, if turned off.
3. The display shows 'CODE'.
4. Press button BAND 4 longer than 3 seconds.
The display shows '10 _ _ _ _', which indicates that you have
ten attempts left at entering the correct PIN code.
5. Enter the PIN code (see Security Card) with preset buttons 1, 2,
3 and 4.
Example:
The code number might be 1 2 3 4.
Press preset button 1 two times 1 0 0 0
Press preset button 2 three times 1 2 0 0
Press preset button 3 four times 1 2 3 0
Press preset button MIDDLE (the round one) five times 1 2 3 4
6. Press button BAND longer than 3 seconds. After that, the
radio starts with operating.

Important:
After the 1st wrong entry of the code number, the display shows:
" 9 - - - - ".
After 10 seconds, the display shows:
" 9 S A F E ".
If you have entered a wrong code two times, 4 dashes will be
shown in the display for about 10 minutes together with the number
of remaining attempts to enter the code.
If you have entered a wrong code, do not turn the unit off until
"SAFE" and the number of remaining attempts for code entry
is shown in the display.
If you have entered a wrong code 10 times, the following appears
on the display:
" D E A L E R

Fault attempt Idle time Fault attempt Idle time

1st 10 Seconds 6st 80 Minutes
2st 10 Seconds 7st 160 Minutes
3st 10 Minutes 8st 320 Minutes
4st 20 Minutes 9st 640 Minutes
5st 40 Minutes 10st Display "DEALER

Cant try these for some reason it comes up with 7 safe? haveI buggared it up?

[w0z26]

Opps just plugged it back in to try the codes but for some reason it comes up with 7 safe on the screen? have I buggared it up?
Thanks for your help hay88