Some users don't know how to install RIFF BOX driver, so here is full step by step manual for Vista and Windows 7 users:
Take note, You may need to repeat this procedure when You perform RIFF Box firmware update for first time !
- Download driver from Riff Box site :
- Unpack the RAR file to any directory
- Connect the RIFF Box with USB cable to Your USB port on PC
- Windows will detect new hardware and show notification :
- Click it and check what is it about
- Windows will report that no driver is found:
- Close this dialog, and open device manager :
- Right click on "RIFF BOX by Rocker Team (c), 2010, and select "Update Driver Software
- Windows will launch driver installation wizard - select "Browse my computer for driver software"
- Now select "Let me pick from a list of device driver software on my computer"
- On next dialog, click "Next"
- Click "Have Disk . . ."
- Click "Browse" :
- Navigate to directory where You unpacked driver, select *.inf file , and click "Open" :
- Click "OK" :
- Select "RIFF BOX Control Port", and click "Next"
- Windows will warn You about unsigned driver software. Select "Install this driver software anyway"
- Windows will now start installing selected driver :
- Congratulations, You just finished first step in using RIFF Box !
Take note, You may need to repeat this procedure when You perform RIFF Box firmware update for first time !