samsung s5570

[imamcell]

help me samsung dead boot eror

[sukizg]

s5570

Hi there
1. download s5570 dll from riff update manager
2. In ressurector settings chose s5570 dll
( follow instruction from interface pinout solder cables on pcb as it is shown)
Samsung S5570 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.

To resurrect Samsung S5570 do this:
Ø Solder JTAG cable to Samsung S5570 JTAG pads;
Ø Insert battery and connect USB cable to phone and PC;
Ø Make sure Samsung S5570 is selected in the list of models;
Ø Click Resurrect button;
Ø Wait few seconds until software signals a successful operation completion;
Ø Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

[hank1978]

that is good!

[adetrya]

Thanks.. Nice information