Please Please add support for u8833 Huawei y300

[imported_2028]

My Huawei y300 ( u8833) is bricked
Please please add support for this device.
Chipset- Qualcomm MSM8225 Snapdragon

Support soon would be very much appreciated
aa3887@yahoo.com

[imported_2028]

Please Please help me :cryin:

[darko5]

y300

My Y300 after repair with riff box dead boot.



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Huawei Y300 V1.0.5179.41132]


Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]


Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK


Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM04G, 0x000000100000 Bytes = 1.00 MB)


Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB


Flashing the dead body...OK
Resurrection complete!

[admk]

My Y300 after repair with riff box dead boot.



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Huawei Y300 V1.0.5179.41132]


Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]


Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK


Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM04G, 0x000000100000 Bytes = 1.00 MB)


Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB


Flashing the dead body...OK
Resurrection complete!

I have this problem too. Need fullflash write, but no anywhere fullflash for my device (Y300-0000 2 sim cards and one camera). May be here anybody help me. Thanks.

[peran]

I try to repair Y300-0100, and after resurrection complete phone is dead, before was recognized as android, now no sign...
Help please!

[princegsm]

Same problem, after sucessfull resurection phone still not power on or get download mode.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Huawei Y300 V1.0.5179.41132]

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (SJS00A, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (SJS00A, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.64GB

Flashing the dead body...OK
Resurrection complete!