how to read condition emmc bga its working good or bad on tab smart report and etc,how to find that emmc its true about config somthing like report on screenshoot :
eMMc smart report failed
read and save ok
update emmc firmware failed
user area forced erase ok
samsung factory format ok
write CID ok
EMMC mybe damage or something of a problem with the cable conected and please correction..
Code:
read info: Memory Type .......................... eMMC Manufacturer ID ...................... 0x15 OEM/Application ID ................... 0x00 Product Name ......................... "N5U00M" Package .............................. BGA User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB) Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB) RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB) OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity) Write Protection Bits ................ NONE Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit) Chip Revision ........................ 0.0 Multimedia Card Revision ............. 1.7 (eMMC v5.0) Serial Number ........................ 0x00000000 Memory Manufacturing Date ............ January, 2013
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Reading SMART Info from Samsung eMMC Chip...ERROR ERROR: Reading SMART Info from Samsung eMMC Chip Failed (ERR[00FF], POS[0080])
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Reading the [KMN5U000ZM-B203] eMMC Core Firmware...OK
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Preparing eMMC Core F/W Update...ERROR ERROR: Preparing eMMC Core F/W Update Failed (ERR[0071], POS[0029])
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Erasing User Area and resetting Password...OK (Completed in 00:01.763)
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Performing Samsung eMMC Factory Format...OK (Completed in 00:00.203)
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Writting CID Register...OK
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Writting CSD Register...OK
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Setting BOOT and RPMB partitions Size...OK
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Unlocking the User Area using the Password...ERROR ERROR: Unlocking the User Area using the Password Failed (ERR[0078], POS[0001])
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Removing Write Protection...OK
Code:
pen serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.6b, JTAG Manager Version: 1.57 [BETA 4] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected eMMC Chip, ID: 0x15/0x00 (N5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Setting Boot Operation Mode...OK