Bug with VTU00M firmware 1.38.4b

[0xMihalich]

Hi all. I'm using my hand-made emmc adaptor with z3x, ATF and RIFF.
log z3x:

Z3X EasyJtag Box JTAG Софт версия. 2.0.7.3
Loading eMMC Addon Firmware... IO: 1800 mV
Box С/Н: ****, ,Микропрограмма Вер.: 01.52
Напряжение подтяжки линии CMD :2000 mV
Напряжение активной линии CMD :1505 mV
HiPower™ mode is ON!
eMMC Device Information
EMMC CID : 15010056545530304DFC3D39868641FA
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
Изготовитель eMMC: ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xFC
EMMC NAME: VTU00M , S/N: 1027180166
EMMC NAME (HEX): 56545530304D00 
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 2048 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: VTU00M_1027180166_20160225_1317.extcsd
Searching for partition tables...
Partitioning not detected...
Сделано.

log ATF

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 15010056545530304DFC3D39868641FB
CSD : D02701320F5903FFF6DBFFFF8E40406D

eMMC Boot Information
Revision 1.6 (for MMC v4.5, v4.51)
BOOT PARTITION     : NOT BOOT ENABLED
PARTITION ACCESS   : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT  : DISABLED
BOOT MODE          : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH    : ENABLED
eMMC FirmW UPDATE  : DISABLED
EMMC CACHE SIZE    : 0 KB
SUPER PAGE SIZE    : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE     : 15758000128 BYTES
BOOT PARTITION SIZE: 2048 KB
RPMB PARTITION SIZE: 128 KB


eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type    : Embedded BGA
Application ID : 00
Product Name   : VTU00M
Product Rev    : 15.12
Product SN     : 3D398686
Manufactured   : January 1998

Card Specific Data
CSD_STRUCTURE     : Extended
SPEC_VERS         : Version 4.1/4.2/4.3
TAAC              : 13 ns
TRAN_SPEED        : 4000000 KHz
READ_BL_LEN       : 512 Bytes
C_SIZE            : HIGH CAPACITY
WP_GRP_ENABLE     : YES
WRITE_BL_LEN      : 512 Bytes
CONTENT_PROT_APP  : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
15010056545530304DFC3D39868641FB.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

log RIFF

Открытие порта...OK
Подключение к RIFF Боксу...OK
Версия Прошивки: 1.38.4b, Версия JTAG Manager: 1.57

Connecting to the SD/eMMC Card...OK
Выставленное I/O Напряжение 2.81V, SD_CLK Frequency is 1 MHz

Memory Type .......................... Unknown Memory
Manufacturer ID ...................... 0x01
OEM/Application ID ................... " V"
Product Name ......................... "TU00M"
Package .............................. Removable
User Area Parition Size .............. 0x01AB40000000 Bytes (1709.00 GB)
Boot Partition Size .................. 0x0000000E0000 Bytes (896.00 KB)
RPMB Partition Size .................. 0x0000003E0000 Bytes (3.88 MB)
OCR Register ......................... 0xFF808000 (High Voltage, High Capacity)
Write Protection Bits ................ Permanent
Boot Configuration ................... No Boot
Chip Revision ........................ 15.12
Serial Number ........................ 0x3D398686
Memory Manufacturing Date ............ December, 2031

I Cant Update firmware, cant Write new CID. Whats up?

ps. Sorry for my English=)

[nicolayer]

Should be Jtag Manager 1.57 [beta2]

[0xMihalich]

should be jtag manager 1.57 [beta2]

Где качать то) не нашел...

[nicolayer]

Где качать то) не нашел...

Unlock Forum - RIFF Box support forum

[f0ou4d]

I like your adapter good work

[noise phone]

schematic diagram please bro

[anda utama]

schematic diagram please bro

This Unlock Forum - RIFF Box support forum