Important information related to RIFF Box eMMC support

[ProOFF]

Hello, I need a firmware klmag2wemb-b031.

[techscrew]

thanks riff team

[simpleprince49]

Hello dear users !

This topic will serve as initial guide for RIFF Box eMMC ISP/Direct functionality. This is not regular update, but rather a major upgrade.
As such, it will come free for all RIFF Boxes registered in last 6 months, and of course for all new RIFF Box customers.

To prepare everything on Your side for this upgrade, You'll need the following:

• RJ45 cable
• 2x100 ohms resistors
• External source for VCC and VCCQ (Optional)
• Moorc adapters (Optional)
• Activation credits (If Your box is older than 6 months)

RJ45 cable is required to connect RIFF Box to eMMC as RIFF Box RJ45 port is used for this function.

2x100 Ohms resistors are required as pull up, to increase signal levels and improve stability.



Extarnal source for VCC and VCCQ is required in case that You don't want to open Your RIFF Box, in order to connect RIFF Box internal VCC voltage source. We know that there are already some adapters on market, which offer this function.


Moorc adapters are well known, and they offer best at price range.



Activation credits You can get in exchange for some money. We have too many of those, and we will be happy to exchange some of them to real money.



RIFF Box RJ45 port pinout:

1-NC
2-SD_CLK
3-SD_DAT0
4-SD_CMD
5-NC
6-NC
7-NC
8-GND
VCC pin is located on RIFF Box motherboard, bottom side. You can locate it if You check attached photo.

Pull up resistors should be connected from VCCQ to both SD_CMD and SD_DAT0 lines.

correct me if im wrong...if had external power supply do we have to modify our box?whats the use of your pinouts there is no 2x100 ohms resestor in there...and another in emmc sometimes i see in pinouts as vcc and vccq
and others 3.3v and 1.8v do this means vcc is 3.3v and vccq is 1.8v?just a question because im confuse

[ricky_accoustic]

The old version v1.56
still can connect to sever
run star jtag maneger?
still usable old versi?
trims

[aloka]

thank you

[anda utama]

add a little colecton fw
KLMAG2GE4A-A002_Firmware[D01C56A6].rar

KMK7X000VM-B314_Firmware[00000000].rar

KMN5X000ZM-B209_Firmware[00000000].rar

[ZameerAhmed]

KLMAG2WEMB-B031 Emmc Firmware.............Plz

[visionsoul]

Thanks

[screw099]

KMK5X000VM-314 EMMC firmware Plz...

[ZameerAhmed]

KLMAG2WEMB-B031 Emmc Firmware.............Plz

[klancalex]

Kmk7u000vm-b309

KMK7U000VM-B309 Firmware read from Lenovo S650

[csc1978]

thank all.....

[anda utama]

KMK5X000VM-314 EMMC firmware Plz...

this fw KMK5X..

KMK5X000VM-B314_Firmware[].rar

[Shamsudin]

kmn5x000za-b209
please upload this firmware in google disk

[tomatos666]

Hello,
i need the Pinout for a KLMAG8DEDD-A101.
Some one can help me?