Htc one mini M4_UL PO58200 stuck in fastboot mode

[ddjadav]

Hi
i can't flash
can' boot in oem RUU

C:\adb>fastboot oem rebootRUU
...
(bootloader) [ERR] Cmd18 polling status timed out, MCI_STATUS: 0x4C2000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) CMD18: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(862): error 2
(bootloader) Start Verify: 3
(bootloader) [ERR] Cmd25 polling status timed out, MCI_STATUS: 0x4C0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
OKAY [  0.140s]
finished. total time: 0.156s

Resurrection complete but still same

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]
Selected Resurrector: [HTC OneMini (PO5820000) V1.0.5165.44619]

Connecting to the dead body...OK
Detected dead body ID: 0x2072D0E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 14.56GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

any other thing i can do with riff box to make this phone

thanks