Tweet
Hi Everyone
conexion done without any error and done in the first attemp :O
just use a modified RJ45 cable and gpg adapter "very easy to make
"
read 2 MB from ROM2
good job Riif team
conexion done without any error and done in the first attemp :O
just use a modified RJ45 cable and gpg adapter "very easy to make
"Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 727 KHz Memory Type .......................... eMMC Manufacturer ID ...................... 0x15 OEM/Application ID ................... 0x00 Product Name ......................... "S5U00M" Package .............................. BGA User Area Parition Size .............. 0x0000E9000000 Bytes (3.64 GB) Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB) RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB) OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity) Write Protection Bits ................ NONE Boot Configuration ................... No Boot Chip Revision ........................ 0.2 Multimedia Card Revision ............. 1.5 (eMMC v4.41) Serial Number ........................ 0xF3F686F4 Memory Manufacturing Date ............ December, 2013
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2] Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 727 KHz Detected eMMC Chip, ID: 0x15/0x00 (S5U00M), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF Completed in 00:00:27.020 (Average Transfer Rate: 75.80 kB/s)
Comment