Board flasching after emmc replace

[klaus4]

now i will replace the mcu from a dead pcb and hope that this mcu is 0x0

[benbyben]

stored in mcu

[klaus4]

so where is the knox stored emmc or mcu? Is it possible to replace the mcu and how to Flash it?

[klaus4]

so replacing emmc will not kill knox 0x1?

[chennai]

which condistion emmc ic replays

replace emmc then writting full flash files.

which condistion emmc ic replays im new to riff

[soshan]

replace emmc then writting full flash files.

[klaus4]

@legija can you please explain the steps for replacing emmc?

[klaus4]

is there someone from Austria who can help me? EMMC I Received

[Mansour Pakdel]

is there the imei and SN in the 128mb dump file? and reading with jtag?

there is efs partition in dump but after full flash with 4 part firmware your imei will be 049..... then you can write imei with other tools

[klaus4]

is there the imei and SN in the 128mb dump file? and reading with jtag?

[Legija]

First thing You have to understand about QC based S4 Samsung - downgrade is not possible, even if You replace eMMC.
Further, if phone was flashed to 4.4.2 version, You have to use exactly same or greater version of firmware to repair it.
128mb dump to ROM1 from required version will power phone on. Of course, in case You have compatible eMMC with correct EXT_CSD flag.

[klaus4]

i9505 thanks for your fast reply

[Legija]

What brand and model You talk about ?

[klaus4]

Hi!

witch steps do I Need to do to Flash a brand new emmc with 4.2.2.

Do i Need to reflash IMEI and SN?

is the JTAG Adapter enough or do I Need to connect to USB too?


Please post a fully detailed Tutorial what to do with a new EMMC and downgrading to 4.2.2?

Thanks

Klaus