senstion xl is dead

[the]

hello every body

i have sensation xl PI39200 WITH PROBLEM DEAD and cannot repair phone is show write error after resurrection

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC SensationXL (PI39200) V1.0.4575.63305]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x4E): Communication is not established. Terminating.

[vekt]

Frequency RTCK change.

[the]

check all speed and Frequency RTCK

but still problem

[babak nuri]

Hi

Best idea is Resurrect phone by selecting USB dll Version from List and Use Test Point

But if your phone dead suddenly,This is HW problem