samsung i9105p dead

[chandio_180]

hi ,,,

i have a i9105p
set was ok and working fine ..
prob was set was in safe mode ,
i flash it in odin
after that set reboot on half samsung logo
i try to get phone in recovry but not,,
in download mode hange on asking volme up and down ...

i did repair boot ..
after that now phone is complete dead ,,,,
i try many times boot repair but ,,,no luck ,,,,

plz ,,,help me ...

[pramodkdp]

same problem here too. resurrection is 100% ok but. phone won't go to download mode nor on. same problem..waiting of ligija for support.

[babak nuri]

Hi
Are you sure you have "P" Version ? Because I9105 and I9105p have a different bootloader...
Then Maybe you have bad eMMC or Maybe you need dump file
So,Best idea is writing dump file and use usb+Jig for force start dl mode....if not work,you have to replace eMMC

[.::JYOTIRMAY::.]

Hi
Are you sure you have "P" Version ? Because I9105 and I9105p have a different bootloader...
Then Maybe you have bad eMMC or Maybe you need dump file
So,Best idea is writing dump file and use usb+Jig for force start dl mode....if not work,you have to replace eMMC

Boss please help .

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9105P V1.0.4905.50530]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (8WMB1R, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (8WMB1R, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB

Flashing the dead body...OK
Resurrection complete!


But set dead. Help me to give full raw full bin GT-I9105P.

[.::JYOTIRMAY::.]

Please help.

[.::JYOTIRMAY::.]

Boss Legija need your kind help.

[.::JYOTIRMAY::.]

Searching for solution 3 days no any supporter respond. @ Boss Legija what kind of help in this forum? If your tool not supported GT-I9105P then why you make this fake solution? Today every box makes some fake solution for publicity. I have a faith about this product. But your product........