Riff Box CDMA Device Support

[JDiamond]

Samsung Admire Pinout

I am looking for the JTAG pinouts for a Samsung Admire (SCH-R720). It looks like the chip is supported by Riff box but the phone does not have any identifying marks on the JTAG pads. Any help would be appreciated. Also is there any other guides for determining the JTAG pinouts by probing with Riff box? I read the probing manual and think I understand but was wondering if there was anything else.


Thanks,

Jerry

[murad6229]

I Need Huawei CDMA C2610 & C2611 Riff Box Unlock DUMP File

I Need Huwai C2610 Unlock Flash File PIZ Help Me
Model: C2610
PlatformID: 0x122CE0E1 (QSC11x0)
Boot version: C2610C04B100
SW version: C2610C04B101SP02
Extended info :
Security code: 856341
Security code #1: 000000
Security code #2: 000000
Keypad codes:
Hidden menu: 000000
Engineering mode: ##497613
Debug: ##236985
System restore: ##258741
MMI test mode: ##147852
Serial no:
XFA9KC1141504793
SPC (856341) accepted.
I Need Huwai C2610 Unlock Flash File PIZ Help Me

[kripalu]

sir please help me to unlock mts sp150 cdma also known as coolpad

if it can be unlock by flash file than please provide the dump file and proccess

thank in adv

[rodelanishan]

Help! Need Huawei ETS 2258 pinout

Please help me!!!!!!!!!!
I need Huawei ETS2258 Jtag pinout.

[djonsi24]

pls pls pls help I need Hisense HS-C1100 pinout or dump file, please.
Thanks.

[Rohan464]

dum file plzz

ld cdma all modle 3500 3510 3600 plzzzzz give me A FILE ARGENT

[jaipur telecom]

s183 in hand but i no know version becose set blinking mode also i have read full flash file s183 16mb working set but writting,earsing problem,redding perfect

http://www.mediafire.com/download/2g732c8wpfap90h/zte+c+s183+file_pinout.rar Working set dump 16mb + pinout

Here is conectivity logs

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Target: [QSC1100, 1.80V, TAP0]
Connecting to the QSC1100 target...OK
Detected dead body ID: 0x122C80E1 - IGNORED!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resetting and Halting target...OK
R0 = 0x00000002 R6 = 0x80034000 R12 = 0xFFFA3662
R1 = 0x000000F0 R7 = 0x00000001 R13 = 0x5800BEF0
R2 = 0x080090FC R8 = 0x08010678 R14 = 0x0800C074
R3 = 0x00000024 R9 = 0x00000000 R15 = 0xFFFF0000
R4 = 0x00003663 R10 = 0x080AEA78 CPSR = 0x000000D3
R5 = 0x00000000 R11 = 0x00000000
Connecting to the NOR Memory based at 0x00000000...OK
Detected an Initialized FLASH1 Chip, ID: 0x0001/0x007E (16MB)

[deddyes]

plz added zte mf90 for next update...