Tweet
I have this dvice is alive but i need efs and i found thread tell the efs in L720dll file but when i connect the dvice to riff box I get this
Connecting to the dead body...FAILED
None is detected.
but when i analyze i get
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4F1F0F0F, IR Length = 0x04 bits
Device on TAP #1: ID = 0x2071B0E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x2071B0E1: Qualcomm APQ8064T, H/W Rev. #2
i want to know what's wrong
and when i connect to another box can connect and repair boot well but on my riff box no !!!!
Connecting to the dead body...FAILED
None is detected.
but when i analyze i get
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4F1F0F0F, IR Length = 0x04 bits
Device on TAP #1: ID = 0x2071B0E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x2071B0E1: Qualcomm APQ8064T, H/W Rev. #2
i want to know what's wrong
and when i connect to another box can connect and repair boot well but on my riff box no !!!!
Comment