Renault radio code needed

[wendy701]

Can you help me with code for Renault Cd
Model No: RENRDW133-10
TK247
RNRD0530019874
Prod No: FD0203400019874
8200300860TK247
thanks in advance

[aissa09]

hi

Can you help me with code for Renault Cd
Model No: RENRDW133-10
TK247
RNRD0530019874
Prod No: FD0203400019874
8200300860TK247
thanks in advance

5534.............................

[wendy701]

renault cd code

Hi, thanks for your help but have had a new battery and now the code 5534 doesnt work, any ideas?

[bogege]

Hi, thanks for your help but have had a new battery and now the code 5534 doesnt work, any ideas?

code is OK for your K247=5534
Read here:

Renault RENRDW133-10
VDO



As originally fitted to :

Renault


This radio is designed to fit Renault vehicles that utilise a seperate display on the dashboard. It cannot be used in other vehicles that do not have this seperate display fitted. The Code number is entered by using the remote steering controls, and not through the buttons on the fascia.

Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible


Renault RENRDW133-10
VDO



As originally fitted to :

Renault


This radio is designed to fit Renault vehicles that utilise a seperate display on the dashboard. It cannot be used in other vehicles that do not have this seperate display fitted. The Code number is entered by using the remote steering controls, and not through the buttons on the fascia.

Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.

Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Then " 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard