Radio code for citroen berlingo 22rc200/35

[gsxr750]

my tip is TOV507 : Code 4445 :yesnod:

thanks you for help

[_Franky_]

[ATTACH=CONFIG]10435[/ATTACH]

I have only this

my tip is TOV507 : Code 4445 :yesnod:

[Sowi]

[ATTACH=CONFIG]10435[/ATTACH]

I have only this

ok ...... try

A507 : 0448 B507 : 0445 C507 : 0942 D507 : 1449 E507 : 3446 F507 : 3943 G507 : 6440 H507 : 3447 I507 : 0444
J507 : 6941 K507 : 4948 L507 : 2945 M507 : 0942 N507 : 2449 O507 : 1446 P507 : 0443 Q507 : 9440 R507 : 8447
S507 : 7444 T507 : 6441 U507 : 5448 V507 : 4445 W507 : 3442 X507 : 2449 Y507 : 1446 Z507 : 0443

@++

[gsxr750]

Xiaomi Redmi Go.part03.rar

I have only this

[Sowi]

I give you bad code because it dosn't works

Try only this code FD0499439029675 please

Hi

please .... Verify your information TOD507 or TOW507

@++

[Goncalves]

[QUOTE = gsxr750; 241902] Je vous donne mauvais code parce qu'il dosn't œuvres Essayez seulement ce code FD0499439029675 s'il vous plaît [/ QUOTE]

Hi
Then gives the right numbers.

[gsxr750]

Hi try Code .... TOD507 = 1449 .... TOW507 = 3442

I give you bad code because it dosn't works

Try only this code FD0499439029675 please

[Goncalves]

I need code in radio philips 22RC200/35

FD0499439029675
TOD507 or TOW507

PHACFFX9029675

Please help

Hi try Code .... TOD507 = 1449 .... TOW507 = 3442

[gsxr750]

I need code in radio philips 22RC200/35

FD0499439029675
TOD507 or TOW507

PHACFFX9029675

Please help

[pinky_si]

Thanks very much guys. the 1106 code worked a charm.

Turns out I had the problem where the display was showing ---, so had to wait the 2 hours for it to reset to showing Cod before I could follow your excellent instructions.

Much obliged!

[Sowi]

Hi guys, thanks for the input.

Code 1106 doesn't work as the buttons only go up to 5.

Numbers RegWorts requested are;

BP1760X2106618
7 641 760 394

Cheers

Code 6346

@++

[RegWorts]

Unfortunately I only have buttons 1,2,3,4 and 5 on the panel, so codes which contain numbers higher than this are unlikely to work

Unless I am missing something?

Code Entry
Switch Radio On - Display Shows " Cod "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

[pinky_si]

Try code 2988 or 9106

Unfortunately I only have buttons 1,2,3,4 and 5 on the panel, so codes which contain numbers higher than this are unlikely to work

Unless I am missing something?

[masterskay62]

Hi guys, thanks for the input.

Code 1106 doesn't work as the buttons only go up to 5.

Numbers RegWorts requested are;

BP1760X2106618
7 641 760 394

Cheers

Try code 2988 or 9106

[pinky_si]

Hi guys, thanks for the input.

Code 1106 doesn't work as the buttons only go up to 5.

Numbers RegWorts requested are;

BP1760X2106618
7 641 760 394

Cheers