Originally posted by Don1980
Announcement
Collapse
No announcement yet.
Mercedes Benz Radio Code
Collapse
X
-
E2 or Error2 = no communication with the receiver...Originally posted by Mb300eI tried, it says ERROR 2
(We treats codes only)
Code Entry as Follows:
Switch Radio On - Display Shows
" CODE "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press " * " To Enter
Note that code entry is only possible when "CODE" is shown in the display.
If the unit is codelocked it will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.
If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to decoders service to be decoded and reset...
Comment
-
Forums - Unlock Forum - RIFF Box support forumOriginally posted by WinFastplease give the code on this tape:
Typ: Audio 10
Model No.: BE 3100
Serial No.: 12860544
Comment
-
Forums - Unlock Forum - RIFF Box support forumOriginally posted by WinFastplease give the code on this tape:
Typ: Audio 10
Model No.: BE 3100
Serial No.: 12860544
Comment
-
Sorry, I'm one of the honest), just to compare the two tape recorders would like to connect both, help pleaseOriginally posted by Dekster
still give code
Typ: Audio 10
Model No.: BE 3100
Serial No.: 12860544
Comment


Comment