Mf2297 code , thanks

[Mariusik]

Hello all,

Need the code of my MF2297 Radio...
S/NO.AL2297 V 12 75686

Many thanks in advance !!
Somebody help me please.

try code 11341

[dellon]

Try code 11341

It works !!!

MANY MANY MANY THANX FOR YOU !!!

[Arthur777]

mf2297 code lost

Hi everybody,

Lost code for my MB radio MF2297
S/NO. AL 2297 V 09 54734

Please help me to find code. Thank you in advance.

[Dekster]

Hi everybody,

Lost code for my MB radio MF2297
S/NO. AL 2297 V 09 54734

Please help me to find code. Thank you in advance.

Try code 65115

[Arthur777]

Try code 65115

Code is incorrect or I entered it in a wrong way...

[RegWorts]

Code is incorrect or I entered it in a wrong way...

65115 is the correct code for S/NO. AL 2297 V 09 54734

Check your Serial Number

Code Entry details

Switch Radio On - Display Shows
" CODE " With " C " Flashing
Enter CODE in the order it is read :
For Example, to Enter Code 65115
Press Preset 6 then 5 then 1 then 1 then 5
If the correct code number is now shown
Press and Hold " SC " to Enter

[Arthur777]

65115 is the correct code for S/NO. AL 2297 V 09 54734

Check your Serial Number

Code Entry details

Switch Radio On - Display Shows
" CODE " With " C " Flashing
Enter CODE in the order it is read :
For Example, to Enter Code 65115
Press Preset 6 then 5 then 1 then 1 then 5
If the correct code number is now shown
Press and Hold " SC " to Enter

Thank you, I'll try again. But now it is WAIT written. How long should I wait to try to enter code again? Can this unit be blocked for all times because of too many attempts to enter code?

[RegWorts]

Thank you, I'll try again. But now it is WAIT written. How long should I wait to try to enter code again? Can this unit be blocked for all times because of too many attempts to enter code?

Leave it SWITCHED ON...UNDISTURBED until it resets itself

This can take an hour or longer (even 24 hours +)

You can enter too many wrong codes before it fully locks ( usually around 15)

[Arthur777]

Leave it SWITCHED ON...UNDISTURBED until it resets itself

This can take an hour or longer (even 24 hours +)

You can enter too many wrong codes before it fully locks ( usually around 15)

Did everything as you described. After one hour CODE with flashing C appeared. I have entered 65115, after entering the last digit ("5"), number 6 became flashing. I pressed SC button and then CODE with flashing C appeared again... Should I continue to hold SC button pressed even after CODE with flashing C appeared after 65115 code entering? Or in case when CODE appears again after code is entered, this means that entered code is wrong?
I've checked serial number - it is the same as I wrote above. Could it be, that previous owner of the car have made some repairs on this radio and, for example, have changed some electronics inside the radio, so the other code is appropriate for this radio now?

[Arthur777]

Searched the internet and found that button ">" (Tune button) should be pressed once for this model (MF2297)... Some sources says that < or > or << or >> button can be pressed. Is it correct?

[RegWorts]

Searched the internet and found that button ">" (Tune button) should be pressed once for this model (MF2297)... Some sources says that < or > or << or >> button can be pressed. Is it correct?

The Code Entry Instructions given were quoted from here

Just a moment...

Alternative Instructions are found here

RADIO CODE UK | £2.99 Codes | Free Alpine MF2297 radio code entry instructions and guides

If you have found anything different then try them all out and let us know if any work

If none work then your radio may have been recoded in the past to a completely different number

[Arthur777]

If none work then your radio may have been recoded in the past to a completely different number

I think it could be so. I found sticker "CATS REPAIR" on the top and on the bottom of the radio. So the code might be changed during the repair...
Thanks a lot for your assistance!!! Really appreciate your help!!!

[Iernean_E]

code

Hello , can u help me whit a code for my MF 2297 serial AL 2297 V 04 10609 thank you in advance

[Goncalves]

[QUOTE = Iernean_E; 245296] Bonjour, u peut m'aider whit un code pour mon MF 2297 de série AL 2297 V 04 10609 merci d'avance [/ QUOTE]

Hi try Code .... 34361

[Iernean_E]

[QUOTE = Iernean_E; 245296] Bonjour, u peut m'aider whit un code pour mon MF 2297 de série AL 2297 V 04 10609 merci d'avance [/ QUOTE]

Hi try Code .... 34361

Thank you works great