Announcement

Collapse
No announcement yet.

Mf2297 code , thanks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Arthur777
    replied
    Originally posted by RegWorts

    If none work then your radio may have been recoded in the past to a completely different number
    I think it could be so. I found sticker "CATS REPAIR" on the top and on the bottom of the radio. So the code might be changed during the repair...
    Thanks a lot for your assistance!!! Really appreciate your help!!!

    Leave a comment:


  • RegWorts
    replied
    Originally posted by Arthur777
    Searched the internet and found that button ">" (Tune button) should be pressed once for this model (MF2297)... Some sources says that < or > or << or >> button can be pressed. Is it correct?
    The Code Entry Instructions given were quoted from here

    Just a moment...

    Alternative Instructions are found here

    RADIO CODE UK | £2.99 Codes | Free Alpine MF2297 radio code entry instructions and guides

    If you have found anything different then try them all out and let us know if any work

    If none work then your radio may have been recoded in the past to a completely different number

    Leave a comment:


  • Arthur777
    replied
    Searched the internet and found that button ">" (Tune button) should be pressed once for this model (MF2297)... Some sources says that < or > or << or >> button can be pressed. Is it correct?

    Leave a comment:


  • Arthur777
    replied
    Originally posted by RegWorts
    Leave it SWITCHED ON...UNDISTURBED until it resets itself

    This can take an hour or longer (even 24 hours +)

    You can enter too many wrong codes before it fully locks ( usually around 15)
    Did everything as you described. After one hour CODE with flashing C appeared. I have entered 65115, after entering the last digit ("5"), number 6 became flashing. I pressed SC button and then CODE with flashing C appeared again... Should I continue to hold SC button pressed even after CODE with flashing C appeared after 65115 code entering? Or in case when CODE appears again after code is entered, this means that entered code is wrong?
    I've checked serial number - it is the same as I wrote above. Could it be, that previous owner of the car have made some repairs on this radio and, for example, have changed some electronics inside the radio, so the other code is appropriate for this radio now?

    Leave a comment:


  • RegWorts
    replied
    Originally posted by Arthur777
    Thank you, I'll try again. But now it is WAIT written. How long should I wait to try to enter code again? Can this unit be blocked for all times because of too many attempts to enter code?
    Leave it SWITCHED ON...UNDISTURBED until it resets itself

    This can take an hour or longer (even 24 hours +)

    You can enter too many wrong codes before it fully locks ( usually around 15)

    Leave a comment:


  • Arthur777
    replied
    Originally posted by RegWorts
    65115 is the correct code for S/NO. AL 2297 V 09 54734

    Check your Serial Number

    Code Entry details

    Switch Radio On - Display Shows
    " CODE " With " C " Flashing
    Enter CODE in the order it is read :
    For Example, to Enter Code 65115
    Press Preset 6 then 5 then 1 then 1 then 5
    If the correct code number is now shown
    Press and Hold " SC " to Enter
    Thank you, I'll try again. But now it is WAIT written. How long should I wait to try to enter code again? Can this unit be blocked for all times because of too many attempts to enter code?

    Leave a comment:


  • RegWorts
    replied
    Originally posted by Arthur777
    Code is incorrect or I entered it in a wrong way...
    65115 is the correct code for S/NO. AL 2297 V 09 54734

    Check your Serial Number

    Code Entry details

    Switch Radio On - Display Shows
    " CODE " With " C " Flashing
    Enter CODE in the order it is read :
    For Example, to Enter Code 65115
    Press Preset 6 then 5 then 1 then 1 then 5
    If the correct code number is now shown
    Press and Hold " SC " to Enter

    Leave a comment:


  • Arthur777
    replied
    Originally posted by Dekster
    Try code 65115
    Code is incorrect or I entered it in a wrong way...

    Leave a comment:


  • Dekster
    replied
    Originally posted by Arthur777
    Hi everybody,

    Lost code for my MB radio MF2297
    S/NO. AL 2297 V 09 54734

    Please help me to find code. Thank you in advance.
    Try code 65115

    Leave a comment:


  • Arthur777
    replied
    mf2297 code lost

    Hi everybody,

    Lost code for my MB radio MF2297
    S/NO. AL 2297 V 09 54734

    Please help me to find code. Thank you in advance.

    Leave a comment:


  • dellon
    replied
    Originally posted by masterskay62
    Try code 11341
    It works !!!

    MANY MANY MANY THANX FOR YOU !!!

    Leave a comment:


  • Mariusik
    replied
    Originally posted by dellon
    Hello all,

    Need the code of my MF2297 Radio...
    S/NO.AL2297 V 12 75686

    Many thanks in advance !!
    Somebody help me please.
    try code 11341

    Leave a comment:


  • masterskay62
    replied
    Originally posted by dellon
    Hello all,

    Need the code of my MF2297 Radio...
    S/NO.AL2297 V 12 75686

    Many thanks in advance !!
    Somebody help me please.
    Try code 11341

    Leave a comment:


  • dellon
    replied
    Hello all,

    Need the code of my MF2297 Radio...
    S/NO.AL2297 V 12 75686

    Many thanks in advance !!
    Somebody help me please.

    Leave a comment:


  • naomiferris
    replied
    Thank you so much

    Originally posted by RegWorts
    try code 5012
    Thank you so much it worked

    Leave a comment:

Working...
X