Announcement

Collapse
No announcement yet.

Help unlock my music!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help unlock my music!

    Hi,

    Please can you track down my car radio code?

    RN258F20265527
    T0W776
    Prod No. FD0302240265527
    Model No. 22DC258/62B


    Many thanks,

    Ista

  • #2
    Originally posted by Ista
    Hi,

    Please can you track down my car radio code?

    RN258F20265527
    T0W776
    Prod No. FD0302240265527
    Model No. 22DC258/62B


    Many thanks,

    Ista
    code 3212
    You must hold at the end to store your code.
    IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY

    Turn on the radio and the display will show 'CODE'
    Use the steering controls for code entry.
    Press the [ ¬] button then rotate the thumb wheel for the correct first digit
    Press the [ ¬] button then rotate the thumb wheel for the correct second digit
    Press the [ ¬] button then rotate the thumb wheel for the correct third digit
    Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
    If the correct code is now shown on screen,
    press and hold the [ ¬] button for up to 10 seconds to store the code

    FOR NO STEERING CONTROL
    press the first preset button for the 1st digit,
    second button for the 2nd digit
    third button for 3rd digit
    forth button for 4th digit
    then press and HOLD button 6 to store. for 10 seconds

    and on some it's hold 5 to store.

    Comment


    • #3
      Thanks for this code. I just went to try it, but the word 'code' doesn't seem to change to '0000' to enable me to enter the code. Any button pressed just makes a beep. Any suggestions how to get around this please?

      Thanks

      Comment


      • #4
        Originally posted by Ista View Post
        Thanks for this code. I just went to try it, but the word 'code' doesn't seem to change to '0000' to enable me to enter the code. Any button pressed just makes a beep. Any suggestions how to get around this please?

        Thanks
        Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.

        Comment


        • #5
          Great - Thanks for that. I'll give it a go on the way to work.

          Comment

          Working...
          X