Becker Europa 2000

[hani72]

please i lost the code of becker europa 2000 serial be1100c4628600
thanks .

[hay88]

please i lost the code of becker europa 2000 serial be1100c4628600
thanks .

look up one post :-)

[hani72]

thanks hay88 but i have an other problem is my posteradio not accepted any code

[hay88]

thanks hay88 but i have an other problem is my posteradio not accepted any code

Please note that code entry is only possible when the display shows "CODE". If the unit is codelocked, leave it switched on for up to two hours and a further attempt at code entry should be possible.
Code Entry as Follows:
Switch Radio On - Display Shows
" CodE "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " V " Repeatedly for 4th digit
If the correct code number is now shown
Press " AUTOMATIC " To Enter

[hani72]

thanks hay 88,
but i leave it switched 4hours ,but i havn't any possibility to enter the code the postradio display ---- .

[hani72]

thank you infinitely, it goes with me.
thank you hay88.thankkkkkkkkkkkkkkkks

[2qp2]

thanks hay 88,
but i leave it switched 4hours ,but i havn't any possibility to enter the code the postradio display ---- .

Hi there, I have problems with codes of 2 radios that I want to instal on a 1990s and a 1980s car. For the 1980s car I have the Becker Europa 2000 (P4606950). I do have the code (which is 7206) but the display reads _ _ _ _ and I had the radio connected for several hours as instructed. The 'CodE' display does not come up however. Reading this thread it seems that hani72 solved this problem but I do not see how. Can you help?

[_Franky_]

Hi there, I have problems with codes of 2 radios that I want to instal on a 1990s and a 1980s car. For the 1980s car I have the Becker Europa 2000 (P4606950). I do have the code (which is 7206) but the display reads _ _ _ _ and I had the radio connected for several hours as instructed. The 'CodE' display does not come up however. Reading this thread it seems that hani72 solved this problem but I do not see how. Can you help?

it's possible the waiting period is up to 24 hours for that radio after 2-3 typed wrong attempts

[2qp2]

Hmm, it is now more than 24 hours and the display still reads _ _ _ _. What would be the next step? If I need to bring it to a service centre what can they do what I cannot do?

[RegWorts]

Hmm, it is now more than 24 hours and the display still reads _ _ _ _. What would be the next step? If I need to bring it to a service centre what can they do what I cannot do?

The important thing is to make sure that it is UNDISTURBED whilst switched on because if it gets interrupted , the waiting time starts all over again

The best way is to connect it up on your workbench to a spare battery and just leave it switched on.

[2qp2]

That is exactly what I did. Anyway, I switched it off and on again and will wait for 24 h again, not that I firmly believe this is going to help.
Does the 'CodE' sign come up by itself?

[2qp2]

_Franky_ and all here, the radio works! Thanks a lot...

[hani72]

'' originaly by 2up2 ''
I solved my problem in this way:
I left my radio operator station connected more than 12 hours after it posted me “code”, and I tested the code and that went, I hope in the same way for you. good chance.merci has all ..........

[djrogga]

Hello!
My old car have a stereo with code,and i dont have this code because this stereo was mounted i my car,so i remove battery so.......
Please help me....
I live in Sweden and i have a Becker Europa 2000 Model BE1100 Serie number: B4646050

greetings
Roger

[hay88]

Hello!
My old car have a stereo with code,and i dont have this code because this stereo was mounted i my car,so i remove battery so.......
Please help me....
I live in Sweden and i have a Becker Europa 2000 Model BE1100 Serie number: B4646050

greetings
Roger

code 5365