Grundig SCD 1910 RDS

[Gabi_bacsi]

Thanks to everybody, it succeed :-)

[welshperson3]

Sorry....will only be available from the Main Dealer or the unit will have to be taken into a Radio Decoding Service to obtain this code

It will not be available for free or cheap from anywhere on the Internet

thank you for taking the time to try and help.

[_Franky_]

Thank You Franky, I could type the code, it was a bit bad contact, but solved is.
So i saw the - - - - and typed, but didn't accepted. how can I make it accept? and the other question: How You think, it would be better to "reset" it: (off from battery a few second)?

i have checked, code 3536 is right.

code entry as follows:
Switch Radio On - Display Shows
" SAFE " And Then Shows e.g. " 1 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
press 'U' button (more as 3 seconds) until "SAFE " appears in the display.
after 3 seconds radio will plays

i think the only way to reset it , is the waiting period

[RegWorts]

My apologies if this request is in the wrong place, but I would be so grateful if someone could help with a code for the following,

Grundig car 2002 (e)

No: 24 462 943

Serial: GM020231306765

Sorry....will only be available from the Main Dealer or the unit will have to be taken into a Radio Decoding Service to obtain this code

It will not be available for free or cheap from anywhere on the Internet

[welshperson3]

My apologies if this request is in the wrong place, but I would be so grateful if someone could help with a code for the following,

Grundig car 2002 (e)

No: 24 462 943

Serial: GM020231306765

[Gabi_bacsi]

Please note that code entry is only possible when four lines " - - - - " and a number is shown in the display. If the display continually shows "SAFE" then the unit may be codelocked and will need to be left switched on up for up to twenty four hours to reset before another code entry attempt is possible.

Attempt - Wait.per.

1 - 21 sec.
2 - 1.5 min.
3 - 5.5 min.
4 - 22 min.
5 - 1.5 hrs.
6 - 6.0 hrs.
7 - 24 hrs.
8 - 24 hrs.

Waiting period after the 7th attempt is always 24hrs!

Thank You Franky, I could type the code, it was a bit bad contact, but solved is.
So i saw the - - - - and typed, but didn't accepted. how can I make it accept? and the other question: How You think, it would be better to "reset" it: (off from battery a few second)?

[_Franky_]

Thank you so much for the quick answer, i tried but nothin' happened :-( I tried a few times your code but nothing just SAFE word on display. is it possible that the radio locked itself because of the lot of trying?

Please note that code entry is only possible when four lines " - - - - " and a number is shown in the display. If the display continually shows "SAFE" then the unit may be codelocked and will need to be left switched on up for up to twenty four hours to reset before another code entry attempt is possible.

Attempt - Wait.per.

1 - 21 sec.
2 - 1.5 min.
3 - 5.5 min.
4 - 22 min.
5 - 1.5 hrs.
6 - 6.0 hrs.
7 - 24 hrs.
8 - 24 hrs.

Waiting period after the 7th attempt is always 24hrs!

[Gabi_bacsi]

Try code 3536

Thank you so much for the quick answer, i tried but nothin' happened :-( I tried a few times your code but nothing just SAFE word on display. is it possible that the radio locked itself because of the lot of trying?

[RegWorts]

hi

I just bought a GRUNDIG scd 1910 RDS head. When I try switch it ON, on it's display: SAFE. I couldn't do anything with it, I tried put in a CD, it accepted, but didn't played and didn'd give back. I need the SECURITY CODE, it have numbers just 1 to 6, but when I push a number button, nothing happens. it's SERIAL NUMBER: GR 0811P0112813 (093)

Please help me, thx

Try code 3536

[Gabi_bacsi]

hi

I just bought a GRUNDIG scd 1910 RDS head. When I try switch it ON, on it's display: SAFE. I couldn't do anything with it, I tried put in a CD, it accepted, but didn't played and didn'd give back. I need the SECURITY CODE, it have numbers just 1 to 6, but when I push a number button, nothing happens. it's SERIAL NUMBER: GR 0811P0112813 (093)

Please help me, thx

[Fabtwo]

But not with this Serial?!?!?!

^^^Ah thx Franky. I love SPAM!!! ;-)

[_Franky_]

I need code for SCD 1910 RDS
Serial
GR 0811 R 0130301
Thanks

my friend , is already answered in another forum

[Fabtwo]

I need code for SCD 1910 RDS
Serial
GR 0811 R 0130301
Thanks

[RegWorts]

As the answer states

.Main Dealer or Radio Decoding Service only for this code

[adamei]

So how can i decode it?