FORD 6000 CD Radio code

[cliffpage]

RADIO CODE, please, please,please

6000CD in my Ford Galaxy. Bought car 2nd hand . the code in the book does not work, but the radio seems to be newer than the car so i assume someone has changed the radio but not changed the code on the radio booklet. Serial No M007633, please help, thanks, Cliff

[Dekster]

6000CD in my Ford Galaxy. Bought car 2nd hand . the code in the book does not work, but the radio seems to be newer than the car so i assume someone has changed the radio but not changed the code on the radio booklet. Serial No M007633, please help, thanks, Cliff

code is: 8360

[Dina Fajersztein-Fine]

Hi can you get a the code for 6000cd s/n v118138

Thanks in advance

[masterskay62]

Hi can you get a the code for 6000cd s/n v118138

Thanks in advance

Ford V Serial codes are not available for free from anywhere in the Internet, as access is required at the Ford factory in the database (through a Dealer Ford)...which is not commercially available as software, try your Ford Dealer, or Radio Decoding Service

[Rabarber]

M032224

Hey this is the normal 6000cd ford mondeo radio, and locked like all the rest with the wrong code from the salesman

My Serial number is M032224

Thanks in advance

[Dekster]

Hey this is the normal 6000cd ford mondeo radio, and locked like all the rest with the wrong code from the salesman

My Serial number is M032224

Thanks in advance

code is: 3071

[Rabarber]

code is: 3071

Thanks, it worked perfectly...

Great service within 1 minut...!

[Dominorocks]

Help

Can someone please help me, after having some work done on my car the radio code has reset itself. It's a 6000CD and I think the serial number is M141299. Does anyone have a code for this pleaseeeeee? Tried the code in instruction manual 8289 and it doesn't work thanks in advance xx

[RegWorts]

Can someone please help me, after having some work done on my car the radio code has reset itself. It's a 6000CD and I think the serial number is M141299. Does anyone have a code for this pleaseeeeee? Tried the code in instruction manual 8289 and it doesn't work thanks in advance xx

8289 is the correct code for M141299....but this may be the wrong Serial Number


Sometimes pressing buttons 6 & 1 together or 6 & 2 will display the Serial Number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing

[GhiaCrazy]

Focus 6000cd radio code wrong?

Recently purchased a focus and was given a radio code of 5090 but does not work!!

I held in button 1 and 6 and got this serial number S or 5 then 0700012 followed by three small numbers 255?

Is this the serial number?

Many thanks in advance.
Sy.

[RegWorts]

Recently purchased a focus and was given a radio code of 5090 but does not work!!

I held in button 1 and 6 and got this serial number S or 5 then 0700012 followed by three small numbers 255?

Is this the serial number?

Many thanks in advance.
Sy.

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing


Removal instructions here

Fitaudio.com – The Worlds Largest Car Stereo Removal Database…

[GhiaCrazy]

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing


Removal instructions here

Fitaudio.com – The Worlds Largest Car Stereo Removal Database…

Thanks Bud ill try whipping it out in a bit and try then.

Regards Sy.

[GhiaCrazy]

Right got the serial now! M741680 Hope this works?

Regards Sy.

[Dekster]

Right got the serial now! M741680 Hope this works?

Regards Sy.

code is: 0560

[GhiaCrazy]

code is: 0560

Dekster your a legend mate I will give it a shot in a while... Many thanks.