Originally posted by masterskay62
View Post
Announcement
Collapse
No announcement yet.
Renault Megane Scenic radio code HELP PLEASE!
Collapse
X
-
Another help request.
Evening all! Can anyone help with the code for a renault radio in my works van? It looks like the same factory standard model in my Scenic. I'd looked at this forum before and got the impression that this was the number you guys need to work your magic 7700433948TW381. If you need more info, let me know and I'll whip it out again!:blush5:
Your help would be greatly appreciated, as it's been months now, and I'm getting sick of listening to the tss-tss-tss of my mates earphones. :willy_nilly:
Comment
-
Originally posted by Ian B View PostEvening all! Can anyone help with the code for a renault radio in my works van? It looks like the same factory standard model in my Scenic. I'd looked at this forum before and got the impression that this was the number you guys need to work your magic 7700433948TW381. If you need more info, let me know and I'll whip it out again!:blush5:
Your help would be greatly appreciated, as it's been months now, and I'm getting sick of listening to the tss-tss-tss of my mates earphones. :willy_nilly:
You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY
Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code
FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds
and on some it's hold 5 to store.
Comment
-
Help!
Originally posted by masterskay62 View PostTry code 1684
Comment
-
Originally posted by Carlito View PostFirst of all, many thanks for the code. Unfortunately I haven't been able to try it yet. I've replaced the original unit (tape/radio) with a salvaged unit (cd/radio, known to be working) When swiched on it displays "code" for a second or so, then "0000" (first digit flashing) but it won't allow me to enter the code. I've tried all previous instructions but none will work. The car has steering wheel controls. I've tried leaving it switched on as suggested but it turns itself off after a while, I guess to stop the battery running down. Are the car and stereo compatible? I seem to remember entering the code on the old unit using the buttons on the unit itself, but the new one just beeps when I try this. Please help. My 3 yr old is suffering with "barbie girl" withdrawl! Many thanks.
You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY
Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code
FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds
and on some it's hold 5 to store.
Comment
-
Cheers!
:hurray: You. My friend. Are a STAR!Originally posted by hay88 View Postcode 3682
You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY
Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code
FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds
and on some it's hold 5 to store.
Comment
Comment