programme problem

[peter043]

hi
I have problem putting in code for radio, when switched on there is 4 ---- displayed.
anybody got a clue how to get rid of this and put code in.
thanks.

[hay88]

BASIC INSTRUCTIONS TO ENTER A BLAUPUNKT RADIO CODE
Switch the ignition key ON
Press and hold AS button * and the ON button at the same time
Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker
Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed
If the display now shows the correct Code number then
Press Button AS and hold to Enter and if successful there should be a
"Beep" from the speaker and the radio should switch on


press the first preset button 1 for the 1st digit, followed by (station +)
second button for the 2nd digit followed by (station +)
third button for 3rd digit followed by (station +)
forth button for 4th digit followed by (station +)
then press (station+) to store

hi
I have problem putting in code for radio, when switched on there is 4 ---- displayed.
anybody got a clue how to get rid of this and put code in.
thanks.

[RegWorts]

hi
I have problem putting in code for radio, when switched on there is 4 ---- displayed.
anybody got a clue how to get rid of this and put code in.
thanks.

It is displaying 4 _ _ _ _ because wrong codes have been rntered.

To restore, leave SWITCHED ON ...UNDISTURBED until it has reset. This could be many hours.

Make sure you are using the correct code

[peter043]

Hi
thanks for the info, it worked.
You know your stuff.
again thanks.

[peter043]

Hi
you are the man, now working, thanks very much