Announcement

Collapse
No announcement yet.

unlock code for philips car 400 stereo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RegWorts
    replied
    Originally posted by Kiljo32 View Post
    Thank you for your help

    My radio does not have a screen display however it is analogue with buttons 1-6. Is the code entry the same or different?

    Thanks


    Sent from my iPhone using Tapatalk
    I believe it should have a separate display unit plugged in the back otherwise it will be difficult to select a radio station.

    Presumably it is not the original radio fitted into your car

    If it is not fitted then you will have to carefully carry out the code entry instructions above listening for the correct "beeps"

    Leave a comment:


  • Kiljo32
    replied
    Originally posted by masterskay62 View Post
    Hi.

    .........3780



    Code Entry as Follows:



    Switch On Ignition (No Need To Start Engine)

    Turn Off Stereo

    Press & Hold Preset " AS " and

    Switch Radio On - Display Shows

    " SAFE " And Then Shows " 10 - - - - "

    Press preset " 1 " repeatedly for 1st Digit

    Press preset " 2 " repeatedly for 2nd Digit

    Press preset " 3 " repeatedly for 3rd Digit

    Press preset " 4 " repeatedly for 4th Digit

    If the correct code number is now shown

    Press & Hold Preset " AS " Until the Unit Beeps


    Thank you for your help

    My radio does not have a screen display however it is analogue with buttons 1-6. Is the code entry the same or different?

    Thanks


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • masterskay62
    replied
    Originally posted by Kiljo32 View Post
    Hi all

    Any idea of the code for my radio. I've had a look on here but my display is analogue 1-6 rather than digital display.

    GM0400X2249584
    DC 396/75E
    2WA04
    01.02.99
    Phillips Car 400 cassette


    Sent from my iPhone using Tapatalk
    Hi.
    .........3780

    Code Entry as Follows:

    Switch On Ignition (No Need To Start Engine)
    Turn Off Stereo
    Press & Hold Preset " AS " and
    Switch Radio On - Display Shows
    " SAFE " And Then Shows " 10 - - - - "
    Press preset " 1 " repeatedly for 1st Digit
    Press preset " 2 " repeatedly for 2nd Digit
    Press preset " 3 " repeatedly for 3rd Digit
    Press preset " 4 " repeatedly for 4th Digit
    If the correct code number is now shown
    Press & Hold Preset " AS " Until the Unit Beeps
    Last edited by masterskay62; 07-15-2017, 05:09 PM.

    Leave a comment:


  • Goncalves
    replied
    Originally posted by Kiljo32 View Post
    Hi all

    Any idea of the code for my radio. I've had a look on here but my display is analogue 1-6 rather than digital display.

    GM0400X2249584
    DC 396/75E
    2WA04
    01.02.99
    Phillips Car 400 cassette


    Sent from my iPhone using Tapatalk
    Hello,
    Try code .... 3780

    Leave a comment:


  • Kiljo32
    replied
    Hi all

    Any idea of the code for my radio. I've had a look on here but my display is analogue 1-6 rather than digital display.

    GM0400X2249584
    DC 396/75E
    2WA04
    01.02.99
    Phillips Car 400 cassette


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • RegWorts
    replied
    Originally posted by Twomill View Post
    Hi , I would appreciate any help. flat battery has caused the Philips radio in my rover to look for code to start up again .
    serial no. is RG594FX1116600
    any ideas how to input code too as backlight in display is gone too
    Sorry....your code will only be available from someone with access to the Main Dealer database or the unit will have to be taken into a Radio Decoding Service

    It is unlikely to be available for free from anywhere on the Internet

    Leave a comment:


  • Twomill
    replied
    Hi , I would appreciate any help. flat battery has caused the Philips radio in my rover to look for code to start up again .
    serial no. is RG594FX1116600
    any ideas how to input code too as backlight in display is gone too

    Leave a comment:


  • Goncalves
    replied
    Originally posted by bountykiller View Post
    Hello,
    I recently became the owner off an Opel Vectra B from 2002 and it came with an aftermarket CD/MP3 player which is working well but doesn't have the ability to be controled from the steering wheel,then I remembered I have a stock CAR400 cassette player from a previous Opel Vectra B I owned 5-6 years ago that I changed then with a DVD player with GPS and reverse camera.Long story short,I lost the code from the CAR400 and I don't remember it anymore,if someone could help me find out it's code I would be very thankfull.I will give the code that the previous person gave. GM040013111321
    Hello,
    See link -- > Unlock Forum - RIFF Box support forum

    Leave a comment:


  • bountykiller
    replied
    Hello,
    I recently became the owner off an Opel Vectra B from 2002 and it came with an aftermarket CD/MP3 player which is working well but doesn't have the ability to be controled from the steering wheel,then I remembered I have a stock CAR400 cassette player from a previous Opel Vectra B I owned 5-6 years ago that I changed then with a DVD player with GPS and reverse camera.Long story short,I lost the code from the CAR400 and I don't remember it anymore,if someone could help me find out it's code I would be very thankfull.I will give the code that the previous person gave. GM040013111321

    Leave a comment:


  • RegWorts
    replied
    Originally posted by Jouda5 View Post
    Hello, I am looking for code to my Philips Car 400.
    GM0400X2377921
    Thanks for reply.
    Sorry....your code will only be available from someone with access to the Main Dealer database or the unit will have to be taken into a Radio Decoding Service

    It is unlikely to be available for free from anywhere on the Internet

    Leave a comment:


  • Jouda5
    replied
    Hello, I am looking for code to my Philips Car 400.
    GM0400X2377921
    Thanks for reply.

    Leave a comment:


  • Goncalves
    replied
    Originally posted by luu View Post
    hi, i need code for car400
    GM0400V1781610
    Hello,

    Your Code .... 3414

    Leave a comment:


  • luu
    replied
    Philips Car 400 code

    hi, i need code for car400
    GM0400V1781610

    Leave a comment:


  • Goncalves
    replied
    Originally posted by xarajoran View Post
    need code for car400
    serial- GM0400W1898773
    thaks
    hi

    0529

    Leave a comment:


  • xarajoran
    replied
    Philips car400 radio code

    need code for car400
    serial- GM0400W1898773
    thaks

    Leave a comment:

Working...
X