Announcement
Collapse
No announcement yet.
blaupunkt unlock code HELP !
Collapse
X
-
[QUOTE=chaflameja;83709]hello. first sorry, but a donīt speak english very well.
I would like to know a car radio blaupunkt Codo CD30 mp3 I bought on ebay for installation on an Opel Corsa C 1.2 twinport.-= CODEDRADIO =- Base navigation No code has immo!!
Only Decode Service for help!!
Comment
-
-
I think I might be screwed. Hoping someone can help. I posted on this forum the specs for my radio and the code suggested did not work. I tried it multiple times, probably 20 times or more. As suggested by a moderator contacted "restored classic" radio and was given a new code to try. Now the display screen on the radio only shows - - - - instead of the word "code". Does this mean I have to take it to a dealer or should I just throw it out? Any suggestion?
Radio Specs: Blaupunkt Sante Fe DCM42
9404230254
190974
Comment
-
Originally posted by steve633csi View PostI think I might be screwed. Hoping someone can help. I posted on this forum the specs for my radio and the code suggested did not work. I tried it multiple times, probably 20 times or more. As suggested by a moderator contacted "restored classic" radio and was given a new code to try. Now the display screen on the radio only shows - - - - instead of the word "code". Does this mean I have to take it to a dealer or should I just throw it out? Any suggestion?
Radio Specs: Blaupunkt Sante Fe DCM42
9404230254
190974
Switch the ignition key ON
Press and hold AS button * and the ON button at the same time
Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker
Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed
If the display now shows the correct Code number then
Press Button AS and hold to Enter and if successful there should be a
"Beep" from the speaker and the radio should switch on
press the first preset button 1 for the 1st digit, followed by (station +)
second button for the 2nd digit followed by (station +)
third button for 3rd digit followed by (station +)
forth button for 4th digit followed by (station +)
then press (station+) to store
Comment
-
Originally posted by Arko74 View Postthanks but i have only numbers 1 to 6 ....
how can i do?
Arko
" CODE "
Press and Hold "BAND"
The display will now show " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press and Hold "BAND" to Enter
Comment
Comment