Originally posted by JPChenet
View Post
Announcement
Collapse
No announcement yet.
Renault Kangoo stereo code
Collapse
X
-
Dear All,
After needing to jump start my van at the weekend the Radio has reset, I would really appreciate help with sourcing the right code for it? I have listed the information I could find on the side of the unit below:
Model No: 22DC229/62M
Product No: FD001270012262
T0H021
RN229F10012262
Thanks in advance!!!
Chris
Comment
-
Originally posted by cwickens View PostDear All,
After needing to jump start my van at the weekend the Radio has reset, I would really appreciate help with sourcing the right code for it? I have listed the information I could find on the side of the unit below:
Model No: 22DC229/62M
Product No: FD001270012262
T0H021
RN229F10012262
Thanks in advance!!!
Chris
Try code >>> 4973 <<<
Comment
-
Originally posted by markcriddle View PostThank you very much for code....could you please advise what I need to do once I have entered the four digits as the last number i enter just keeps flashing, is there something i should press to save the code ?
PHILIPS RENAULT CODE ENTRY INSTRUCTIONS
FOR CARS WITH A STEERING WHEEL REMOTE CONTROL
(Note :If you don`t have the [ ¬ ] button then push the thumbwheel in and some will have an [ A¬ ] button )
Turn on the radio and the display will show 'CODE'
Use the Steering Wheel Remote Controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code
IF THERE IS NO STEERING WHEEL CONTROL , THEN USE THE PRESET BUTTONS ON THE RADIO
Press the First Preset Button repeatedly for the 1st digit to be displayed
Press the Second Preset Button repeatedly for the 2nd digit to be displayed
Press the Third Preset Button repeatedly for 3rd digit to be displayed
Press the Fourth Preset Button repeatedly for 4th digit to be displayed
Then press and HOLD Preset button 6 for 10 seconds to store your code
(Note :Some radios use Preset Button 5 to store the code )
================================================== ==========
Comment
-
Originally posted by markcriddle View PostThanks for the instructions, have followed them exactly but the code does not work......after holding button 6 for 10 secs at the end it just goes back to code again....could there be a different code ?
Try button 5 instead of 6 to store the code
If it still fails to work then your radio may have been recoded to a completely different number.
Comment
Comment